Hanna Instruments HI5221 - Software Update; pH Setup; Accessing pH Setup

21
Software update
This function allows the user to update instrument soft-
ware. In order to start the PC upgrade application, you
need to select the proper baud rate, the software update
package and start the update.
The pH Setup menu allows the user to set the parameters associated with pH measurement and
calibration. These parameters can be set specifically for each channel (HI5222 only). The settings
will be applied only to the active channel.
Accessing pH Setup
• Press
while in Measure mode and then
to select pH range for the desired channel.
• Press
and then to access pH Setup
menu.
To access a pH Setup option:
• Use
or to highlight the desired
option.
• Press
to access the selected option.
The following is a detailed description of the pH Setup
option screens.
SYSTEM SETUP
pH SETUP