HANNL Mera ELB Eco User Manual (English)

To Next Page

Mera ELB Eco 24V DC New Model

Information for the new features:

The Hannl Mera ELB Eco 24V DC as upgrade from a Limited Autom. 24V DC or from a rebuilding

of a Mera ELB Eco 24V DC have a new controlling which makes it possible to have more control

for the customer about the machine.

The usual optics and the easy handling is still present.

The new version you can recognise on the silver power button (old: black powerbutton).

New functions:

• Put cleaning fluid on your record in the program „LEFT“ and „RIGHT“:

Now it it possible to applicate cleaning fluid directly from the program „LEFT“ and

„RIGHT“ with the „SPEED BUTTON“. Until now in the old version you only have only

the possibillity to chose the direction of the turntable and then go into the program

„LIQUID“ to drop cleaning fluid.

• Set the output of the pump:

With the actual version you can set global the output of the pump. For this choose the

program „LIQUID“ and turn the „SPEED BUTTON“. To set the output higher turn the

„SPEED BUTTON“ to the right in the clockwise rotation. To set the output lower turn the

„SPEED BUTTON“ to the left in the clockwise rotation. This gives every customer the

chance to set the machine individual.

After you have set the output test it with the brusharm. If it is correct you are finished,

otherwise you must set it again until you have found the wished output.

Need help?

Do you have a question about the HANNL Mera ELB Eco and is the answer not in the manual?

HANNL Mera ELB Eco Specifications

General

Details upgrades, familiar optics, and the silver power button on the new model.

Apply cleaning fluid directly via LEFT/RIGHT programs using the SPEED BUTTON.

Adjust global pump output via LIQUID program and SPEED BUTTON for customization.

Adjust turntable speed within the VACUUM program using the SPEED BUTTON.

Perform a factory reset to restore default settings using POWER and SPEED BUTTONS.