User’s Manual
17
AUDIO SOURCE
While transferring via the HDMI port, it is recommended to set
AUDIO SOURCE to HDMI; if no sound is outputted ,it is
recommended to select AUDIO INPUT as PC, and make sure
the PS audio output cable is connected to monitors LINE IN (or
AUDIO IN)port[For HDMI Input only]
OTHER SETTING
RESET Reset to the factory settings
MENU TIME
Select 「MUNU TIME」option to set the OSD time out from 10
to 60 seconds, Enter the option and adjust the level.
OSD H POSITION
Select「OSD H POSITION」option to adjust the horizontal
position of the OSD, Enter the option and adjust the level.
OSD V POSITION
Select「OSD V POSITION」option to adjust the vertical
position of the OSD, Enter the option and adjust the level.
LANGUAGE
Select「LANGUAGE」option to change the language of the
OSD, Enter the option and select a language. [Reference only
the OSD language depends on the selected model]
TRANSPARENCY
Select 「TRANSPARENCY」option to adjust the transparency
of the OSD. Enter the option and adjust the level.
INFORMATION SETTING
INFORMATION
Display Horizontal frequency/Vertical frequency/Resolution
information.
To Next Page