How to reset settings on HANNspree TV?
To reset the settings on your HANNspree TV, use the Setup Wizard function in the OSD Setup menu. If OSD items are colored in gray, the system is in a state such that those settings are not available.
What to do if my HANNspree TV has no picture and sound?
If your HANNspree TV has no picture and sound, ensure the power cord is properly connected and check if the power LED is on.
What to do if my HANNspree ST289MUB remote control doesn’t work?
If your HANNspree TV remote control isn’t working, make sure the battery is inserted correctly and try replacing it with a new one. Also, ensure the TV power cord is securely plugged in and that there's a clear path between the remote and the sensor. Try operating the remote at a closer distance to the TV.
Why is there no sound on my HANNspree ST289MUB, but the picture is OK?
If you have picture but no sound on your HANNspree TV, first ensure that the source device is functioning correctly and that the audio cable is securely connected. Also, make sure the mute is off, and try increasing the volume using the control panel or the remote control.
What to do if my HANNspree TV has no picture, or a poor picture but the sound is OK?
If your HANNspree TV has no picture, or the picture quality is poor but the sound is OK, check the antenna and cable connections. You may also need to adjust the brightness in the OSD menus.
How to fix snow on my HANNspree ST289MUB screen?
To fix snow appearing on your HANNspree TV screen, adjust the location of the antenna, placing it away from roads or sources of interference. Also, check the connections of the antenna and the video signal line.
Why is the picture not in color on my HANNspree ST289MUB?
If the picture on your HANNspree TV is not in color, adjust the saturation in the OSD menus.
What to do if I cannot receive some TV channels using cable TV on my HANNspree TV?
If you cannot receive some TV channels using cable TV on your HANNspree TV, try using the Auto Scan function in the OSD Channel menu.
What to do if my HANNspree TV screen image turns over?
If the screen image on your HANNspree TV turns over, make sure the video signal cable is connected properly.
How to fix blurred or overlapped images on HANNspree ST289MUB?
To correct blurred or overlapped images on your HANNspree TV, try adjusting the sharpness setting. Also, select programs with high-quality signals, and adjust the direction of the antenna or change the video signal cable.
Essential guidelines for user safety when operating the TV.
Precautions and guidelines for safely installing the TV.
Explains the functions of each button on the remote control.
Instructions for connecting the TV to power and an antenna/cable.
Guide for connecting various external audio and video devices to the TV.
Guide to adjusting picture quality settings like brightness, contrast, and color.
Instructions for customizing audio settings such as mode, equalizer, and balance.
General| Screen Size | 28 inches |
|---|---|
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Connectivity | HDMI, VGA, USB |
| VESA Mount Compatible | Yes (100 x 100 mm) |
| Display Technology | LED |
| Refresh Rate | 60 Hz |
| Speakers Power | 2 x 3W |
| HDMI Ports | 1 |
| VGA Port | 1 |
| USB Port | 1 |
| Headphone Jack | 1 |
| Resolution | 1920 x 1080 (Full HD) |
| Viewing Angle | 178° |
To Next Page
