What to do if my Hanover Indoor Fireplace remote control does not work?
If the remote control for your Hanover Indoor Fireplace isn't working, first, try changing the battery. If that doesn't solve the issue, check to ensure that the master switch is in the 'ON' position.
Why does my Hanover X56WMEF1BLK Indoor Fireplace turn off and will not turn on?
Your Hanover Indoor Fireplace may be turning off and not turning back on because it has overheated, and its safety device has caused the thermal switch to disconnect, or the house circuit breaker has tripped. Unplug the appliance and allow it to cool for 15 minutes before plugging it back in. Also, reset the house circuit breaker.
What to do if my Hanover X56WMEF1BLK Indoor Fireplace heater does not provide heat when turned on?
If the heater on your Hanover Indoor Fireplace isn't providing heat, it could be due to a tripped thermal switch or circuit breaker. Turn the unit off, unplug it for 5 minutes, then plug it back in and turn it on. Additionally, turn off the circuit breaker that supplies electricity to the unit, wait 5 minutes, and then flip the circuit breaker back on.
General| Model | X56WMEF1BLK |
|---|---|
| Type | Electric Fireplace |
| Fuel Type | Electric |
| Color | Black |
| Voltage | 120V |
| Remote Control | Yes |
| Adjustable Thermostat | Yes |
| Overheat Protection | Yes |
| Power Consumption | 1500W |
| Flame Effect | LED |
| Warranty | 1 Year Limited |
Instructions for cleaning and maintaining the electric fireplace exterior.
Lists the specific tools needed for assembling the electric fireplace.
Details the necessary tools for assembly and installation.
Provides a brief overview of initial setup steps before operation.
Identifies the placement of manual controls and the master power switch.
Explains how to use the master switch to control power supply.
To Next Page