H a n s e 3 5 0
3
Design Category
According the European Recreational Craft Directive each craft has to meet the requirements of
the intended design category.
The sailing yacht “Hanse 350” is certified according design category A.
In the Directive, design category A is characterised as follows:
Design category A: Ocean
Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and
significant wave heights of 4 m and above but excluding abnormal conditions, and vessels
largely self-sufficient.
Certification
In accordance with the EC Directive, the certification module Aa was chosen for this yacht. The
boat is built under consideration of the internal production control. The yard confirms the
compliance with the Recreational Craft Directive.
The stability and buoyancy is in compliance with the applicable standards and was assessed by
a notified body. The Germanische Lloyd, located in Hamburg, was commissioned as a notified
body according to the EC Recreational Craft Directive (see Declaration of Conformity).
Identification
The hull identification is mounted on the starboard side of the transom. It is a globally unique
sequence of numbers and letters.
This number is affixed a second time at a hidden place only known to the manufacturer in order
to identify your yacht in case of theft.
Builder’s Plate
In accordance with the requirement of the Directive, the builder’s plate is affixed in the cockpit.
The information it contains is stipulated and should be explained here.
To Next Page
Loading...