Why is no steam coming out of my Hanseatic Iron?
If no steam is emitted from the soleplate of your Hanseatic Iron, it could be due to a couple of reasons: first, there might not be enough water in the water tank, so fill the water tank up to the “MAX” mark. Second, the temperature setting might be too low, so select the highest heat setting.
What to do if my Hanseatic Iron is not heating up?
If your Hanseatic Iron's soleplate remains cold even when plugged in, the issue could stem from two potential causes. First, the socket might not be receiving power, so check the fuse or try another socket. Second, the temperature setting could be set too low; in this case, simply select a higher temperature.
Why is the steam shot button not working on my Hanseatic Iron?
If the steam shot button on your Hanseatic Iron isn't working, there are a few potential reasons. It could be that there's not enough water in the water tank. Also, the temperature might be set too low, so try selecting a higher heat setting. If you're using the function for the first time, push the steam shot button several times in a row until steam is emitted.
What to do if my Hanseatic Iron discolors garments?
If your Hanseatic Iron is discoloring garments, the temperature setting was likely too high. Ensure that the heat setting corresponds to the specifications on the care label. You may also want to test an inconspicuous area on the inside seam before ironing the entire garment.
Why is limescale coming out of my Hanseatic Iron?
If limescale or impurities are escaping from the holes in the soleplate of your Hanseatic Iron, it's likely because you've filled the water tank with very hard water. To resolve this, use the self-clean feature.
To Next Page
General