What to do if my Hanseatic EU-KJ700G-H32 Air Cleaner is not working?
If your Hanseatic Air Cleaner isn't working, check the following: * Ensure the On/Off button is pressed to switch the appliance on. * Verify the mains plug is firmly inserted into the socket. * Try a different socket to rule out a defective socket. * Check fuses and/or circuit breakers. * Inspect the mains cord for damage. If damaged, contact our Service Centre.
Why cigarette smoke is not adequately removed by my Hanseatic EU-KJ700G-H32?
If cigarette smoke and other odours are not being adequately removed by your Hanseatic Air Cleaner, consider these possibilities: * Ensure the filter is correctly inserted. * Change the filter if it's dirty. * Remove any objects blocking the air inlets. * If using a new hygiene filter, take it out and remove the protective cover before reinserting it.
What to do if the cleaning warning on my Hanseatic EU-KJ700G-H32 Air Cleaner does not go out?
If the cleaning warning or the pollutant indicator on your Hanseatic Air Cleaner doesn't turn off, press the ION button for at least 3 seconds after changing or cleaning the filter. If the issue continues, clean the filter again and then press the ION button for at least 3 seconds.
Why does the air quality indicator light red on my Hanseatic EU-KJ700G-H32 Air Cleaner?
If the air quality indicator lights up red during continuous operation of your Hanseatic Air Cleaner, it could be due to: * The room being too large for the appliance's purifying capacity. In this case, let the air purifier continue to work continuously. * Missing filters. Ensure all filters are inserted.
What to do if the fine dust value display on my Hanseatic Air Cleaner does not change?
If the Fine Dust value display and the air quality display on your Hanseatic Air Cleaner aren't changing, it might be because: * The sensor is still unstable shortly after being switched on. Allow a few minutes for the sensor to stabilize. * The appliance is poorly positioned. Try placing the appliance in a different location. * Strong odours in the room (like cigarette smoke) are reducing the sensor's sensitivity. Operate the appliance for a day at the highest power level.
What does E1 mean on my Hanseatic Air Cleaner?
If the indicator E1 appears on the display of your Hanseatic Air Cleaner, it means the filters are not inserted correctly. Insert the filters correctly.
General| Model | EU-KJ700G-H32 |
|---|---|
| Category | Air Cleaner |
| CADR | 700 m³/h |
| Filter types | Pre-filter, HEPA filter, Activated carbon filter |
| Filter Type | HEPA filter, Activated carbon filter |
To Next Page