Need help?Do you have a question about the Hantarex LCD 32" SG and is the answer not in the manual?
Ensures safe connection to power supply, grounding, and proper installation methods.
Guidelines for indoor use, ventilation, temperature, and handling during transport.
Actions to take in case of device damage or failure, emphasizing authorized service.
Details compliance with European directives for radio interference.
Instructions for product disposal according to EU directives for recycling.
Includes fuse capacity, general warnings on panel degradation, and height limitations.
Advises sitting at a distance equivalent to three times the screen width to avoid eye fatigue.
States that specifications may vary without notice and manufacturer disclaims liability.
Recommends saving the guarantee label for service center communication.
Describes options for wall mounting or placing the TV on a table with its base or feet.
Step-by-step guide for connecting cables and initial TV setup including channel search.
Emphasizes using only approved accessories and proper installation to prevent accidents.
Details for RS232, PC DVI-D, PC RGB, Component, SCART, and Main connectors.
Details for Video/S-Video, PC Audio, Headphone, Audio Switch, and External Speakers.
Details for RS232, PC DVI-D, PC RGB, Component, SCART, and Main connectors.
Details for Video/S-Video, PC Audio, Headphone, Audio Switch, and External Speakers.
Guides on connecting antenna, PC, Component, SCART, AV, and other sources.
Procedure for switching on the TV and what to expect if no signal is detected.
Explains using the remote control for TV functions and OSD menu behavior.
Explains the functions of the main switch and navigation buttons on the TV itself.
Describes switching the monitor on/off and its standby behavior.
Details how to change input signals, adjust volume, and change channels using buttons.
Lists all remote control buttons and their specific functions based on video source.
Explains power, source selection, volume, mute, menu navigation, and teletext functions.
Details keys for PIP, teletext modes, channel selection, and numeric input.
Describes the startup process and the meaning of diagnostic LED indicators (Red/Green).
How to select TV/DTV channels and switch between input sources.
Instructions for adjusting volume, muting, and tuning analog channels.
Instructions for connecting a VCR using SCART input and avoiding picture interference.
Recommends avoiding fixed pictures on screen for extended periods to prevent damage.
Guide to connecting DVD output to COMPONENT 1 or 2 inputs for video and audio.
Explains compatibility of monitor inputs with DVD player outputs for signal types.
Lists supported PC resolutions, horizontal, and vertical frequencies for analog RGB.
Clarifies input requirements like separated synchronism and potential image quality issues.
How to activate the OSD menu using the remote and navigate submenus and options.
Overview of main OSD sections: Input Source, Sound, Picture, Channel, Options, PIP.
Options for Picture Mode, Color Temp., and Size adjustments for TV and Video inputs.
How to adjust picture brightness and contrast with visual examples.
How to adjust color saturation with visual examples of Decreases and Increases.
Controls for picture sharpness and color temperature settings.
Options for adjusting picture size and aspect ratio for various resolutions.
Specific picture settings for PC input, including Brightness, Contrast, and Sharpness.
Adjusts picture contrast and color temperature for optimal viewing.
Automatic adjustment and fine-tuning of picture geometry for PC input.
Moves the displayed picture horizontally using directional buttons.
Adjusts vertical picture position and frequency for optimal PC display.
Options for adjusting picture size and enabling Native mode for PC input.
Procedure to activate Native mode for PC-RGB input for best display.
Options for sound modes (User, Standard, Music, etc.) and volume adjustment.
Adjusts audio balance between channels and audio frequencies via equalizer.
Controls automatic volume adjustment and selects sound modes like Stereo or Dual.
Restores factory settings or sets power-on/off times and programs.
Selects OSD language and adjusts background transparency for menus.
Configures screensaver modes and dynamic contrast for image protection and quality.
Sets the country for channel configuration and performs automatic channel search.
Detailed steps for manually searching, tuning, and memorizing channels.
Selects the color system and audio system based on country for analog channels.
Manages channel lists by setting favorites, reordering, and renaming channels.
Fine-tunes selected programs and activates Picture-in-Picture (PIP) mode.
Selects the input signal and size for the PIP window.
Allows choosing PIP window position and changing the source layout.
Enables changing the audio source between main and secondary displayed inputs.
Guidelines for cleaning the screen and general maintenance advice.
Instructions for safe transport to protect the fragile light-emitting panel.
Details video standards, PC resolution, PIP support, and aspect ratio compatibility.
Details screen size, resolution, brightness, contrast, view angle, and connectors for 32" model.
Details screen size, resolution, brightness, contrast, view angle, and connectors for 40" model.
Details video, PC, tuner, and audio features.
Covers TV controls, OSD language, and screensaver settings.
Details dimensions, weight, mains voltage, and power consumption.
Lists all accessories provided with the TV.
Pinout and function descriptions for the HD VGA/RGB D15 connector.
Pinout and function descriptions for the S-VHS connector.
Detailed pinout and function descriptions for the SCART Euroconnector.
Troubleshooting steps for problems related to missing image or sound from speakers.
Solutions for TV not responding to remote control or poor analog/digital channel reception.
Steps to resolve analog channel tuning problems and no audio when tuned.
To Next Page
General
