E6000 Portable Multi-Gas Detector Henan Hanwei Electronics Co., Ltd.
17
Select---means this channel is open.
Cancel---means this channel is closed.
Keep preessing until all the channgels have been set. The
device will save the setting and exit to the normal detection mode.
Closed channels will have a displayed in the channel box.
Otherwise, it is open.
5.11 Password setting
Move the cursor to the incon and press button to
enter the submenu, shown as below.
Press to adjust the figure and press button to move
the cursor. After setting, press to save the new password.
6. Battery charging
If low voltage alert is activated or the device cannot be power on,
please charge the device immediately in safety area.
Correct the charger connector first to the charge port of the device
when power off. Then, connect the plug of the charger to the
To Next Page
Loading...