Need help?Do you have a question about the Hanwell 4000 Series and is the answer not in the manual?
Lists the required items for communication between EMS and a 4000 Series Sensor Unit, including a USB lead and EMS application.
Details the power source for the sensor units, specifying a 3.6V AA Lithium battery and cautions against using alkaline types.
Explains how to attach and detach the sensor unit using a wall-mounting bracket, including part numbers for Durable Units.
Describes the optional plug-in device used to override the transmit interval and force frequent transmissions for testing.
States compliance with RoHS, WEEE EU Directives, CE, and UKCA marking, and provides a link to the EU Declaration of Conformity.
Details the sequence of messages displayed on the LCD screen when the 4000 Series Sensor Units power up.
Provides instructions on cleaning the sensor unit with a damp, non-abrasive cloth and a caution against immersion in water.
Details how to connect sensor units to external probes using specific wire color codes for channels 1, 2, and 3.
Recommends testing sensor unit operation after EMS setup, using a Radio Testing Dongle and checking signals on EMS.
Guides users on entering calibration data for sensor units into the EMS application, including selecting 'Edit Mode'.
Guides on setting alarm parameters and levels within the EMS application, referencing the online user guide.
Explains the process of synchronising sensor units with the EMS database to update serial numbers and calibration settings.
Details how sensors with LCDs show alarm symbols when high/low thresholds are exceeded, after synchronisation.
Explains using EMS Remote Management Tools to merge data from logged sensor units with the EMS database.
Provides Hanwell Solutions Limited's UK contact address, phone number, and website for general inquiries.
Lists the contact telephone number and email address for technical support inquiries.
Directs EU and overseas customers to contact local distributors and provides a link to the distributor list.
General| Category | Data Loggers |
|---|---|
| Manufacturer | Hanwell |
| Operating Temperature | -20°C to +50°C |
| Measurement Parameters | Temperature, Humidity |
| Humidity Range | 0% to 100% RH |
| Resolution | 0.1°C (temperature), 0.1% RH (humidity) |
| Communication Interface | Wireless |
To Next Page