HANYOUNG NUX MA4N-A - Technical Specifications and Installation; Time Range Specifications; Product Specifications; Panel Cutout Dimensions

Time range
Dimensions
Panel cutout
Connections
Specifications
sec
min
hrs
10h
1. 2
3
12
30
0.12 ~ 1.2
0.3 ~ 3
1.2 ~ 12
3 ~ 30
1.2 ~ 12
3 ~ 30
12 ~ 120
30 ~ 300
Setting range
Max. time
Time unit
Time Limit 1c
Instautaneous 1c
Time Limit 2c
Time Limit 2c
Time Limit 1c
Instautaneous 1c
24 - 240 V a.c / d.c 50 - 60 Hz
10 % from supply voltage
5.3 VA (240 V a.c), 2.5 W (240 V d.c)
Max. 0.1 sec
Min. 20 ms
Max.
5 % 0.05 sec
N.O: 10 A 125 V a.c, 5 A 250 V a.c, 5 A 30 V d.c
N.C: 3 A 125 V a.c, 2 A 250 V a.c, 1A 30 V d.c
Max.
0.3 %
Max. 2 %
Min. 100 MΩ (Base on 500 V d.c)
2000 V a.c 50 / 60 Hz for 1 min.
2000 V Max.
10 - 55 Hz double amplitude 0.75 mm
10 - 55 Hz double amplitude 0.5 mm
300
Approx. 30 G)
100 Approx. 10 G)
Over 10 million operations (Open & Short frequency : 180 / min)
Over 100,000 (250V a.c 3 A load resistance)
Socket type 11 Pin
Socket type 8 Pin
-10 ~ 55 No condensation)
-20 ~ 65
No condensation)
35 ~ 85 %R.H.
About 100g (Including fixing bracket)
Non voltage Input
Impedance in a short circui t: Max. 2
Residual voltage in a short circuit:
Max. 0.7 V d.c
Impedance in open: Min. 100
MA4N-A MA4N-B
MA4N-C
MinSignal
length
Input
condition
Vibration
Shock
Life
expectancy
START Input
START Input
INHIBIT Input
INHIBIT Input
RESET Input
RESET Input
Output
Mechanical
durability
Malfunction
durability
Mechanical
durability
Malfunction
durability
Mechanical
Electrical
M o d e l
Supply voltage
Voltage regulation
Power consumption
Resetting time
Setting error
Repeat error
Temperature error
Insulation resistance
Dielectric strength
Impulse voltage
Terminal type
Operation ambient
temperature
Conservation temperature
Operation ambient humidity
Weight
(unit : mm)
(unit : mm)
MA4N-A : 2 relay work as Time limit.
MA4N-B : The relay connected , ,
work as Instantaneous and
othr ealys work as time limit.
Please refer to Timing charts for
working of relays
Two relays in Mode A1 and D1 work
as Time limit.
The relays in Mode B1, C1, E1, F1
connected , , work as Instantaneous.
And other realys work as time limit.
MA4N-C : According to timing charts,
relays works as Time limit or Instantaneous.
Please refer to Timing charts for working
of relays.