To Next PageTo Next Page
Need help?Do you have a question about the HANYOUNG NUX MP Series and is the answer not in the manual?
General| Output type | Relay, Transistor |
|---|---|
| Power supply voltage | 12V DC |
| Contact capacity | 5A 250V AC |
| Control output | Transistor output: NPN open collector |
| Dielectric strength | 2000V AC for 1 minute |
| Ambient temperature | -10°C to 55°C |
| Ambient humidity | 35% to 85% RH (non-condensing) |
| Display | LCD |
| Setting range | 0.01sec~9999hr |
| Time Range | 0.01sec~9999hr |
Indicates an emergency situation that can cause death or serious injury if not followed.
Indicates a situation that can cause death or serious injury if not followed.
Indicates a possibility of minor injury or property damage if not followed.
Defines the model name structure and its components.
Details power voltage, fluctuation, and consumption.
Describes display type, external connection, and input methods.
Specifies the type and capacity of the control output.
Covers mechanical/electrical life, insulation, dielectric strength, noise, shock, temperature, and humidity.
Identifies ON and OFF time display windows for set/elapsed times.
Describes the function of ON/OFF time setting, LOCK, and STA keys.
Explains the purpose of ON, OFF, and STA output indicator lamps.
Details wiring for non-voltage inputs from NPN or open collector sensors.
Illustrates the connection diagram for voltage input signals.
Specifies the maximum setting time and range for ON time.
Specifies the maximum setting time and range for OFF time.
Shows the default ON and OFF times for the device.
Explains the unstable time during power on and off for signal stability.
Details when to apply input signals relative to power status.
