Timing charts (MA4N-C)
A1 MODE : ON DELAY
B1 MODE : ON DELAY 1 (One-shot output)
C1 MODE : ON DELAY2
D1 MODE : FLICKER OFF START
E1 MODE : FLICKER ON START
F1 MODE : INTERVAL
Power
Time-Limit output operation display LED
Operation / Conducting display LED
Time-Limit contact N.C
Time-Limit contact N.O
Power
Time-Limit output operation display LED
Operation / Conducting display LED
Time-Limit contact N.C
Time-Limit contact N.O
Power
Time-Limit output operation display LED
Operation / Conducting display LED
The Output width of one shot is fixed by 0.5 second
Time-Limit contact N.C
Time-Limit contact N.O
Instantaneous contact N.C
Instantaneous contact N.O
Power
Time-Limit output operation display LED
Operation / Conducting display LED
Time-Limit contact N.C
Time-Limit contact N.O
Instantaneous contact N.C
Instantaneous contact N.O
Power
Time-Limit output operation display LED
Operation / Conducting display LED
Time-Limit contact N.C
Time-Limit contact N.O
Instantaneous contact N.C
Instantaneous contact N.O
Power
Time-Limit output operation display LED
Operation / Conducting display LED
We suggest over 100 ms of Min. setting time for D1, E1 output mode because excessive short setting time may cause of malfunction
Time-Limit contact N.C
Time-Limit contact N.O
Instantaneous contact N.C
Instantaneous contact N.O
t: Setting time, t-a: Within setting time, Rt: Resetting time
To Previous Page
Loading...
