Need help?Do you have a question about the Haojue UF115 and is the answer not in the manual?
General| Fuel System | Carburetor |
|---|---|
| Starting System | Electric & Kick |
| Front Suspension | Telescopic Fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Seat Height | 740 mm |
| Wheelbase | 1240 mm |
| Engine Type | Single Cylinder, 4-Stroke, Air-Cooled |
| Transmission | CVT |
Guidelines for the initial break-in period to ensure optimal performance and longevity of the motorcycle.
Introduction to the user's manual, covering its scope, purpose, and guidance for motorcycle care.
Safety guidelines for installing accessories and managing the motorcycle's weight distribution.
Locating the VIN and engine number for reference and service purposes.
Comprehensive safety advice including gear, pre-ride checks, familiarization, and skill awareness.
Precautions for riding in bad weather, slippery roads, and adhering to speed limits.
Diagrams and labels identifying key control components and parts of the motorcycle.
Detailed explanation of the ignition switch positions and their functions for starting and steering lock.
Explanation of dashboard indicators, including speedometer, turn signals, fuel gauge, and gear indicators.
Details on the dimmer switch, overtaking switch, horn button, and turn signal switch on the left handlebar.
Explanation of the hazard warning switch, light switch, and electric starter button on the right handlebar.
Instructions for operating the choke lever and throttle grip for engine starting and speed control.
Information on the front brake lever operation and the location and refueling of the fuel tank.
Explanation of the fuel cock handle positions (open/off) and their effect on fuel flow to the carburetor.
How to operate the gear shift lever for smooth gear changes and proper drivetrain function.
Guidance on adjusting the rear shock absorber spring preload for different riding conditions.
Operation of the rear brake pedal and the kick start lever for stopping and starting the engine.
Information on the motorcycle's storage case capacity and the use of the helmet hook.
Details on the main stand, side stand, and the rear carrier, including their usage and limitations.
Specifications for recommended fuel octane rating and engine oil types for optimal performance.
Guidelines for throttle limit, gear variation, and new tire break-in for optimal performance and safety.
Checklist of crucial items and systems to inspect before operating the motorcycle for safety.
Step-by-step guide for starting the engine, including cold/warm procedures and safety precautions.
Steps for starting off, engaging first gear, and moving the motorcycle forward.
Proper techniques for using the transmission for smooth operation and optimal engine speed range.
Advice for climbing steep hills and descending slopes using engine braking.
Steps for safely stopping the motorcycle, selecting neutral, and parking securely.
Chart outlining recommended periodic inspection and maintenance intervals for various motorcycle components.
Procedures for safely removing and installing the motorcycle battery, including precautions.
Instructions for checking, cleaning, and replacing the air filter to maintain engine performance.
Guidance on inspecting the spark plug, checking its gap, and recommended replacement procedures.
Steps for checking the engine oil level and performing an oil change for engine longevity.
Information on inspecting and maintaining the engine oil strainer, requiring professional attention.
Procedure for checking and adjusting the clutch separation clearance for proper engagement.
How to adjust the engine idle speed to the recommended RPM range.
Procedure for adjusting the throttle cable play for smooth operation and to prevent unintended acceleration.
Inspection, cleaning, and replacement of the fuel filter for optimal fuel delivery.
Checks and adjustments for the drive chain, including lubrication and tension for safe riding.
Essential daily inspections for the brake system, including fluid levels, hoses, and wear components.
Information on brake fluid type, level checks, and inspection of disc brake pads and rotor wear.
Procedure for adjusting the free stroke of the front brake lever for optimal responsiveness.
Guidance on adjusting the rear brake pedal and inspecting wear limits for safe braking.
Instructions for checking tire pressure and wear indicators to ensure safety and longevity.
Recommended tire sizes and types for the motorcycle, emphasizing the use of standard tires.
Details on front and rear brake light switches and guidelines for replacing light bulbs.
Information on locating and inspecting the fuse box, with precautions for fuse replacement.
Steps to diagnose and resolve common engine starting failures, checking fuel and ignition systems.
Instructions for safely draining fuel and preparing the motorcycle for transportation.
Procedures for storing the motorcycle for extended periods, including fuel, battery, and exterior care.
Steps for activating, installing, and connecting a new motorcycle battery, with safety warnings.
Guidelines for proper battery usage, charging, and precautions to prevent damage or explosion.
Key performance metrics, dimensions, and riding characteristics of the motorcycle.
Technical data for the engine, electrical system components, and fluid capacities of the motorcycle.
To Next Page
