Happy Beds Arctic Series User Manual

1951
510
956
mm
Arctic Wooden Low Sleeper
4 Drawer Storage Bed
Important to read before assembly:
Only adults should assemble this product.
Do NOT use any power tools as this may damage the frame.
heavy.
Please keep small parts out of reach of children.
www.happybeds.co.uk
@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Happy Beds Arctic Series Specifications

General

Brand	Happy Beds
Model	Arctic Series
Category	Indoor Furnishing
Language	English

Summary

Pre-Assembly Guidance

Important Warnings Before Assembly

Check contents, use assistance for heavy parts, avoid power tools, and prevent floor damage.

Assembly Steps Overview

Steps 1-4: Initial Frame Construction

Assembling base, side panels, crossbars, and drawer runners.

Steps 5-8: Frame Reinforcement

Fitting rear panels, supports, top panels, and protective guards.

Steps 9-10: Drawer/Door Fixtures

Attaching drawer runners, hinges, and drawer fronts.

Steps 11-14: Drawer Assembly

Assembling drawer sides, bottoms, and fronts, then attaching runners.

User Guide and Safety Information

Product Safety Instructions

Age suitability, fire safety, approved parts, level surface use, adult assembly, and strangulation risks.

General Care and Maintenance Advice

Cleaning, checking fixings, and safe product movement.