6
Charging
In order to charge Victory Bluetooth, connect the device with a computer via USB cable or
plug the cable into an adapter and socket. Charging is signalized by the red control diode. A
fully charged battery is sufficient for 3 to 4 hours of usage.
Turn OFF the device before charging!
Advice and warnings
To ensure proper functioning, keep the device clean.
Be careful when cleaning the device. You alone are responsible, if you destroy the
device cleaning it.
Protect the device from fire, water, and extreme temperatures.
The package of the device and must be handled in accordance with local laws.
All unrecyclable parts of the device must be handled in accordance with local laws.
Keep the device out of the reach of children.
Don't keep the devices connected, if you're not using it.
Do not keep the device ON for too long – it may cause battery destruction
To Previous Page
Loading...