Need help?Do you have a question about the Happy Nuts Ballber and is the answer not in the manual?
General| Brand | Happy Nuts |
|---|---|
| Model | Ballber |
| Category | Electric Shaver |
| Language | English |
Choose the desired trimmer guard for your preferred hair length.
Activate the trimmer by pressing the power button.
Slide the trimmer blade across the skin to remove hair.
Rinse the blade under water, wipe with a soft cloth, and store dry.
Use no guard or the 1mm guard for a very close, tight trim.
Utilize the 2mm or 4mm guards for achieving a stubble look.
Employ the 6mm guard for trimming hair to a longer length.
Green light indicates a charged trimmer; flashing red means charging is needed.
Red light indicates charging; green light means fully charged.
Full charge takes 120 minutes, providing up to 150 minutes of use.
Push the trimmer blade head with thumbs in the arrow direction to detach.
Place replacement blade into trimmer body, blade-side up, and snap it in.
Ensure trimmer is off and not charging. Replace blades every 6 months.
Use brush for hair removal, rinse blade, wipe with cloth, store in dry place.
Use only as intended, supervise children, avoid damaged cords, keep away from heat.
Do not immerse in water, unplug immediately if fallen into water.
Dispose of non-replaceable battery according to local environmental laws.
To Next Page