Happy Nuts Ballber - Step-by-Step Trimmer Operation; Select Guard; Power On Trimmer; Trimming Hair

HAPPY NUTS THE BALLBER™ USER GUIDE
just the tips USING YOUR GUARD
5 Differen LengthSte b Ste
Choose your guard, if desired.
Ste 1
Slide trimmer blade across skin to
remove hair, repeat as necessary.
Ste 3
Rinse the blade under running water
and wipe with a soft cloth.
Store in a dry place.
Ste 4
Press power button to turn on trimmer.
Ste 2
1 2
Instruction:
To attach the guard, slide it over the top or bottom of
the trimmer blade so that the notches on the sides of
the guard cover the hardware on the sides of the
trimmer. To remove the guard, unlatch one side of
the guard and remove from the blade.
USE NO GUARD OR 1mm GUARD FOR A TIGHT TRIM
USE THE 2
mm OR 4mm guard FOR SOME STUBBLE
USE 6
mm guard FOR a LONGer trim
VISIT WWW.MYHAPPYNUTS.COM/REGISTER
REGISTER THE BALLBER™ & JOIN THE NUT CLUB
TO RECEIVE A FREE, EXTENDED WARRANTY.