Need help?Do you have a question about the Harbinger L2404FX-USB LvL series and is the answer not in the manual?
General| Brand | Harbinger |
|---|---|
| Model | L2404FX-USB LvL series |
| Category | Music Mixer |
| Language | English |
Microphone preamplifiers designed for low noise, high gain, and 48V phantom power for condenser mics.
Eight built-in compressors on mic inputs and insert jacks for connecting outboard gear.
Built-in digital USB interface for recording and playback of stereo audio to/from a computer.
Essential safety guidelines for operating the mixer, including electrical safety, ventilation, and handling.
Designed for mono inputs, supporting both microphone and line signals.
XLR connector for microphone-level signals, accepting most professional microphones including condenser mics.
1/4" input for line-level signals from keyboards and outboard gear; accepts balanced or unbalanced cables.
Controls input gain for selected channel from mic or line input; adjust for optimal signal level.
3-band EQ with sweepable mid-frequency for mono channels; adjusts highs, lows, and mids.
Designed for stereo or mono inputs; includes HPF but no compressors/inserts.
The Multi Core effects processor has 25 presets; select effect type via encoder and confirm.
Set the output level for the control room and headphones.
Switches solo mode between After Fader Listen (AFL) and Pre Fader Listen (PFL).
Class Compliant USB 1.1 interface for direct connection to computers for audio.
Steps to connect computer via USB and select mixer for audio playback through channels 11/12.
Steps to connect computer via USB and set up DAW for recording audio from the mixer.
Troubleshooting steps for when a microphone is plugged in but no level is detected.
Steps to identify and resolve noisy audio issues with the mixer.
Troubleshooting steps for when signal is visible on meters but not heard through speakers.
To Next Page
