Page 6For technical questions, please call 1-800-444-3353.SKU 35559
35561
SPECIFICATIONS
Model 35559 35561
Ignition System
Manual
(Light w/
Matches)
Piezo Electric
(Matchless
Ignition)
Fuel Source
Standard LP Gas Tank
(not included)
Compatibility
For Use With UL Listed:
Model 97333 LP Regulator &
Hose Kit
(not included)
BTU per burner 15,000 Maximum
Number of Burners 2
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
ASSEMBLY INSTRUCTIONS
WARNING! Close the valve on the
propane tank (not included) prior to
assembling, performing maintenance,
or making any adjustments to the
stove.
CAUTION! This product is machine
manufactured. Be aware of sharp
edges. Use heavy-duty work gloves
and ANSI-approved safety goggles
when assembling.
Turn the Propane Stove upside down, 1.
and attach a Rubber Foot (7) to each
corner of the unit.
To attach the Temperature Control 2.
Knobs (4), insert the Knob onto the
Burner Control Shaft by aligning the
at edges of the Knob and Shaft.
Make sure that the Knobs are seated
properly. (See Figure A.)
WARNING: The Propane Stove requires
the attachment and use of the Model
97333 LP Regulator & Hose Kit (UL
Listed) which are sold separately by
Harbor Freight Tools. (See Figure
A.)
To attach the Model 97333 LP 3.
Regulator & Hose Kit to the Propane
Stove, remove the plastic protective
cap from the Inlet Connection Nozzle
(5) on the Stove. Then, screw the
Hose Connector rmly onto the Inlet
Connection Nozzle. (See Figure A.)
GAS VALVE
PROPANE TANK
(NOT INCLUDED)
TEMPERATURE
CONTROL KNOB
(4)
INLET
CONNECTION
NOZZLE
(5)
HOSE
CONNECTOR
MODEL 97333
LP REGULATOR & HOSE KIT
(NOT INCLUDED)
FIGURE A
REV. 09l
To Next Page
Loading...