Page 5For technical questions, please call 1-888-866-5797.Item 56658
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY: Operator below must wear ANSI-approved safety goggles
during use. Keep Drone within 328 feet of Remote Control. If Drone goes out of range, it will stop working
and fall.
WARNING! To prevent serious injury, avoid
sudden movements of controls while flying.
CAUTION! Only fly outdoors during daylight
hours in an area with no obstructions, power
lines, vehicles, animals or people nearby.
Pairing
1. Turn the Drone ON – the red and green LED lights
will flash. Place the Drone on a flat surface.
2. Turn Remote Control ON. Red Indicator
Light will flash twice then stay lit.
3. Drone LED lights will flash rapidly and then stay
lit, indicating the Drone and Remote are paired.
Speed Control
Drone speed is set to normal by default. To change to medium speed, push the Directional
Switch forward once. To change to high speed push the Directional Switch forward again .
To return to normal speed push the Directional Switch forward a third time.
To Next Page
Loading...
