EasyManua.ls Logo

Harbor Freight Tools 66906 - Operating Instructions; Initial Setup and Cleaning

Harbor Freight Tools 66906
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SKU 66906 For technical questions, please call 1-800-444-3353. Page 5
OPERATING INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram at the end of this manual.
Note: Before using, wash the Lid (2) and the five Food Trays (3) in hot, soapy water,
taking care to rinse completely. Dry with a soft cloth. Wipe the base with a soft
clean cloth or sponge. NEVER IMMERSE BASE, CORD OR PLUG IN WATER
OR ANY OTHER LIQUID.
Before using, make sure the Dehydrator unit is unplugged. See 1. FIGURE 1 and the
Assembly Drawing on page 10.
Clean all parts before assembling. Always wash the Food Trays (3) and Lid (2) before 2.
each use. This will prevent food contamination.
Place the base assembly on a flat, smooth surface near an electrical outlet. 3.
Food Trays (3)
Lid (2)
Bottom (8)
Power Cord (5)
Figure 1

Related product manuals