Harbor Freight Tools 67781

To Next Page

FLAT PANEL TV

WALL MOUNT

Model

67781

INSTRUCTIONS AND PRECAUTIONS

Visit our website at: http://www.harborfreight.com

SAVE THESE

INSTRUCTIONS.

READ ALL

PRECAUTIONS AND

INSTRUCTIONS.

2010 by Harbor Freight Tools

. All rights

reserved. No portion of this document or any artwork

contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight

Tools. Diagrams within this document may not be drawn

proportionally. Due to continuing improvements, actual

product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

For technical questions or replacement parts,

please call 1-800-444-3353.

SPECIFICATIONS

Weight Capacity 150 lb.

For LED / LCD / Plasma TVs 37” to 61” wide

UNPACKING

When unpacking, make sure that the item is

intact and undamaged. If any parts are missing or

broken, please call Harbor Freight Tools at

1-800-444-3353 as soon as possible.

IMPORTANT SAFETY INFORMATION

Do not exceed 150 lb. max. weight capacity of 1.

TV Bracket. Sudden load movement may briey

create excess load causing product failure.

Do not mount TV Bracket to hollow wall, gypsum 2.

board, or similar material that will not support the

weight of the TV. Mount only to 2” x 4” wood stud

or concrete/brick walls that can safely support

combined weight of Bracket, TV and all attached

hardware and components.

If you are unsure wall is strong enough to 3.

support weight of TV and TV Bracket, contact a

professional installer to reinforce wall.

Do not mount overhead.4.

Assemble and install only according to these 5.

instructions. Improper assembly and installation

can create hazards and lead to personal injury

and property damage.

Verify that mounting surface has no hidden utility 6.

lines before drilling or driving screws.

Wear ANSI-approved safety goggles and heavy-7.

duty work gloves during installation.

Inspect before installing; do not mount to wall if 8.

parts are missing, loose or damaged.

Use as intended only. Do not use TV Bracket for 9.

any purpose for which it was not designed.

Keep installation area clean and well lit.10.

Do not assemble or install when tired or when 11.

under the inuence of drugs or medication.

This product is not a toy. Do not allow children to 12.

play with or near this item.

Maintain product labels and nameplates. These 13.

carry important safety information. If unreadable

or missing, contact Harbor Freight Tools for a

replacement.

Need help?

Do you have a question about the Harbor Freight Tools 67781 and is the answer not in the manual?

Summary

General Safety Information

Weight Capacity and Mounting Restrictions

Do not exceed weight limit or mount to unsupported wall types.

Installation Precautions

Ensure wall strength, avoid overhead mounting, and follow assembly instructions.

Pre-Installation Checks

Verify utility lines, wear safety gear, and inspect parts before installation.

Product Usage and Maintenance

Use as intended, keep area clean, avoid installation when impaired, and maintain labels.

Assembly and Mounting Instructions

Preparation and Tools

Read safety info, check bracket screws, and gather required tools for mounting.

Mounting to Wood Studs

Locate studs 16" apart, drill 3-1/2" deep holes, and mount bracket using lag bolts.

Mounting to Brick or Concrete Walls

Drill four 3-3/8" deep holes using masonry bit, insert anchors, and secure bracket.

Attaching Support Arms to TV

Secure support arms to TV using appropriate screws, pads, and spacers.

Mounting TV to Bracket and Adjusting Angle

Hang TV on bracket, lock with screws, and adjust angle using screws and nuts.

Parts List and Diagram

Component Identification

Lists and illustrates all parts included in the wall mount kit.

Serial Number Recording

Instructions to record the product's serial number or purchase date.