Harbor Freight Tools 95641

Questions and Answers

L
Linda HinesJul 31, 2025
Why does my Harbor Freight Tools 95641 boat move on its own?
- S
  Stacy GutierrezJul 31, 2025
  Your Harbor Freight Tools Toy boat might be moving or turning without your input for a couple of reasons. First, the transmitter batteries may be low, so try replacing the old batteries in the transmitter with new ones. Second, someone else nearby might be using a radio-controlled device. If that's the case, try changing the frequency crystals on both your transmitter and the boat.
M
Michael LoweryAug 6, 2025
What to do if Harbor Freight Tools 95641 boat won't steer straight?
- L
  Lori WebbAug 6, 2025
  If your Harbor Freight Tools Toy boat isn't steering straight or responding to turning commands correctly, the propellers might be damaged or obstructed. Turn off the power and inspect both propellers for any damage or debris. If necessary, replace the affected propeller(s).
J
Joseph JordanAug 12, 2025
Why does my Harbor Freight Tools Toy boat move or turn without control?
- A
  Ashley EvansAug 12, 2025
  This issue may arise due to a couple of reasons. First, the Transmitter batteries might be low, in which case you should replace them. Second, another person might be operating a radio-controlled device nearby. If this is the case, try changing the frequency crystals on your Transmitter and boat.
L
Laura JohnsonAug 18, 2025
What to do if Harbor Freight Tools Toy boat will not start?
- M
  Michael TurnerAug 18, 2025
  If your boat isn't starting, there could be a couple of reasons. First, check if the Transmitter batteries are low and replace them if needed. Second, ensure that the Battery Pack is properly connected to the Electric Speed Controller, referring to Figure 2 for guidance.
F
fallenAug 25, 2025
How to fix Harbor Freight Tools Toy boat that won't steer straight?
- M
  Matthew McknightAug 25, 2025
  If your boat isn't steering straight or turning correctly, one or both of the Propellers may be damaged or have debris. Turn off the power and inspect both Propellers for any damage or obstructions. Replace them if necessary.