Harbor Freight Tools Central Pneumatic 31317 User Manual

AIR NAILERAIR NAILER
AIR NAILERAIR NAILER
AIR NAILER
3/4” - 2”3/4” - 2”
3/4” - 2”3/4” - 2”
3/4” - 2”
ASSEMBLY and OPERATING
INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2000 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
31317
REV 12/03
®
®

Harbor Freight Tools Central Pneumatic 31317 Specifications

General

Brand	Harbor Freight Tools
Model	Central Pneumatic 31317
Category	Nail Gun
Language	English

Summary

ASSEMBLY and OPERATING INSTRUCTIONS

Specifications

Key technical details and specifications of the air nailer, including brads, PSI, load capacity, and air inlet.

Save This Manual

Instruction to keep the manual and invoice for future reference and safety information.

Safety Warnings and Precautions

Essential safety guidelines and precautions for using the tool to reduce risk of injury or damage.

Unpacking

Instructions for checking contents upon receiving the tool and contacting for missing parts.

Operation

Step-by-step guide on how to prepare and operate the air nailer with air supply.

Maintenance

Procedures for maintaining the tool, including emptying brads and cleaning after use.

Troubleshooting

Common issues and solutions for air leakage, slow cycling, skipping nails, and water dripping.

Parts List

A comprehensive list of all parts for the air nailer with corresponding part numbers.

Assembly Drawing

Exploded view diagram showing the assembly of the tool with labeled parts.