Harbor Freight Tools Central Pneumatic 47065 User Manual

21 GALLON
CAST IRON VERTICAL
OIL-LUBRICATED
AIR COMPRESSOR
Heavy Duty 4 HP Peak Motor
Model 47065
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright
©
2002 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
REV 11/02; 11/04
®
OPERATING INSTRUCTIONS
®

Harbor Freight Tools Central Pneumatic 47065 Specifications

General

Model	47065
Horsepower	2 HP
Max Pressure	125 PSI
Pump Type	Oil-Free
Voltage	120V
Max PSI	125 PSI
Amps	15 Amps

Summary

General Safety Warnings and Precautions

Specific Product Warnings and Precautions

Unpacking

Operating Instructions

To Check The Oil Level

Check the oil level using the oil window to ensure it is at the maximum level.

To Turn The Air Compressor On

Follow steps to connect air hose, plug in, and start the compressor.

To Adjust The Air Output To The Pneumatic Tool

Learn how to adjust air pressure output for connected pneumatic tools.

To Use The Tank Pressure Relief Valve

Understand how to use the relief valve for quick decompression of the air tank.

To Empty Air And Condensation From The Tank

Daily procedure to drain moisture and prevent tank corrosion using the drain valve.

Inspection, Maintenance, and Cleaning

Pre-Use Inspection

Inspect general condition, fittings, and parts for leaks or damage before each use.

Daily Maintenance Tasks

Perform daily checks on oil level and purge tank of moisture.

Scheduled Maintenance

Clean air filter every 100 hours, replace oil every 500 hours.

Cleaning and Storage

Wipe down for cleaning and keep in a dry location for storage.