Harbor Freight Tools Central Pneumatic 98904 User Manual (English)

To Next Page

INDUSTRIAL AIR FILTER REGULATOR

Model

98904

SET UP AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2008 by Harbor Freight Tools

herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Dia-

grams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may

differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 10c

Need help?

Do you have a question about the Harbor Freight Tools Central Pneumatic 98904 and is the answer not in the manual?

Harbor Freight Tools Central Pneumatic 98904 Specifications

General

Brand	Harbor Freight Tools
Model	Central Pneumatic 98904
Category	Air Cleaner
Language	English

Summary

Safety Warnings and Precautions

Keep Work Area Clean

Maintain a tidy workspace to prevent accidents and injuries.

Observe Work Area Conditions

Avoid damp, wet, or flammable environments; ensure good lighting.

Keep Children Away

Ensure children are kept away from the work area and the product.

Use the Right Tool

Use the product for its intended purpose and avoid modifications.

Do Not Overreach

Dress Properly

Use Eye and Ear Protection

Always wear ANSI-approved safety goggles and hearing protection.

Disconnect Power

Do Not Exceed Max Pressure

Adhere to the maximum operating air pressure limit of 160 PSI.

Avoid Unintentional Starting

Stay Alert

Check for Damaged Parts

No Alcohol or Drugs

Never operate tools while impaired by alcohol or drugs.

Maintenance Safety

Assembly

Install Nipple

Thread Air Regulator

Install Air Valve

Attach Regulator Handle

Air Connections

Connect Compressor to Inlet

Connect Air Tool

Operation

Check for Leaks

Set Regulator Pressure

Turn the Regulator Handle (1C) to set desired pressure, observing the Pressure Gauge (6B).

Harbor Freight Tools Central Pneumatic 98904 User Manual

Table of Contents