Harbor Freight Tools Luminar Indoor 70030 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 19a
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2018 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Harbor Freight Tools Luminar Indoor 70030 Specifications

General

Bulb Type	LED
Power Source	Battery
Battery Quantity	3
Material	Plastic
Mounting Type	Freestanding

Summary

Warning Symbols and Definitions

DANGER Symbol

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING Symbol

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION Symbol

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE Symbol

Addresses practices not related to personal injury.

Important Safety Information

Usage and Installation Precautions

Safety guidelines for product use, installation, and environment.

Operational and Device Handling Safety

Precautions for operation, electrical connections, and personal safety.

Specifications

Setup

Installation Preparation

Steps for selecting location, cleaning surface, and preparing the tape for installation.

Cutting and Connecting the Tape

Instructions on how to cut and join LED tape sections using connectors.

Operation

Remote Control Setup

Initial steps for remote control and turning on the tape light.

Color and Brightness Adjustment

How to control color intensity and white light brightness using the remote.

Special Effects Control

Using the remote to activate various lighting effects like fade, jump, and flash.

Maintenance and Servicing

Cleaning and Inspection

Procedures for cleaning the tape light and remote control.

Remote Control Battery Replacement

Instructions for accessing and replacing the battery in the remote control.

Troubleshooting Common Issues

Solutions for problems such as the lights not turning on.

Parts List and Diagram

Limited 90 Day Warranty