To Next PageTo Next PageWhy does the handle move up when Harbor Freight Tools Automobile Parts jack is under load?
The handle might move up when the jack is under load because there may be too much hydraulic oil inside the unit. Check the fluid level and adjust if needed.
What to do if Harbor Freight Tools Pittsburgh Automotive 95553 jack saddle will not lift all the way?
If the saddle will not lift all the way, the jack may be low on oil. Check the oil level and refill if needed.
What to do if Harbor Freight Tools Pittsburgh Automotive 95553 pump stroke feels spongy?
If the pump stroke feels spongy, the valves may be blocked and may not close fully. To flush the valves: 1. Lower the Saddle and securely close the Release Valve. 2. Manually lift the saddle several inches. 3. Open the release valve and force the saddle down as quickly as possible.
How to fix Harbor Freight Tools Pittsburgh Automotive 95553 jack that will not lift at its weight capacity?
If the jack will not lift at its weight capacity, check that the Release Valve is fully closed and bleed air from the system.
General| Brand | Harbor Freight Tools |
|---|---|
| Model | Pittsburgh Automotive 95553 |
| Category | Automobile Parts |
| Language | English |
Details for the 12-ton capacity air/hydraulic bottle jack, including weight, height, and pressure.
Details for the 20-ton capacity air/hydraulic bottle jack, including weight, height, and pressure.
General precautions for using tools, emphasizing reading instructions and work area safety.
Guidelines for maintaining a safe work environment, including lighting and avoiding explosive atmospheres.
Recommendations for personal safety, such as staying alert, dressing properly, and avoiding overreaching.
Guidelines on using the correct tool, avoiding forced use, and checking for functional switches.
Instructions for maintaining the tool, checking for damage, and proper storage.
Procedures for tool servicing, emphasizing qualified personnel and using identical replacement parts.
Guidelines for connecting to an air source, including pressure limits and avoiding hazardous gases.
Definitions of various safety symbols used in the manual, such as PSI, NPT, and warning indicators.
Detailed safety instructions for operating the device, including capacity limits and personal protective equipment.
Instructions for initial setup, emphasizing reading safety information before use.
Guidance on connecting the air supply, including warnings about accidental operation.
Steps to purge air from the hydraulic system to ensure proper jack efficiency.
Steps for preparing the vehicle and positioning the jack safely before lifting.
Detailed instructions for operating the jack using compressed air.
Instructions for operating the jack manually when compressed air is unavailable.
Procedures for checking equipment safety and identifying potential failures before use.
Step-by-step guide for replacing the hydraulic oil in the jack reservoir.
Guidance on identifying and resolving common issues with the bottle jack's operation.
A comprehensive list of all parts included in the bottle jack assembly.
