To Next PageTo Next Page
Need help?Do you have a question about the Hard Head 021094 and is the answer not in the manual?
Safety guidelines for using the water heater, covering age, supervision, and risks.
Specifications including voltage, pressure, volume, output, and dimensions.
Overview of the sealed hot water heater with accumulator tank and insulation.
Details on the product's components, heating element, and thermostat control.
Product must be installed in areas with normal fire safety, protected from water spray.
Recommendations for heat loss, water exposure, pipe orientation, and wall mounting.
Product requires <6 bar pressure; safety valve must be fitted to supply pipe.
Details on inlet/outlet pipes, safety valve, shut-off valve, and hose connections.
Step-by-step guide on how to empty the product for installation or maintenance.
How to connect products with a power cord and plug to a power point.
Requirements for permanent connection, including separate circuit and wiring.
Verify correct power supply connection and that the product is full of water before first use.
How to set the desired water temperature using the control panel dial.
Explanation of the built-in protection and what to do if it trips.
Guidelines for cleaning the product using a soft cloth and avoiding harsh chemicals.
Importance of the anode for corrosion protection and replacement recommendations.
General| Brand | Hard Head |
|---|---|
| Model | 021094 |
| Category | Water Heater |
| Language | English |
