13
1 Introduction
1.1 Product description
UV protected greenhouse for cultivation collar.
1.2 Symbols
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
Discarded product must be recycled
according to current regulations.
2 Safety
2.1 Safety definitions
Warning! If you do not obey these instructions, there
is a risk of death or injury.
Caution! If you do not obey these instructions, there
is a risk of damage to the product, other materials or the
adjacent area.
Note! Information that is necessary in a given situation.
2.2 Safety instructions
● Read the warning instructions that follow before you use
the product.
● Do not modify the product.
● Put the product on a stable and level surface.
● Do not use the product if it is damaged.
3 Assembly
3.1 To assemble the product
1 Make sure all parts are included.
2 Follow the assembly instruction shown in the
illustrations. You will need a cutter to cut out the
plastic cover and screwdriver for the assembly.
(Figure 1 — Figure 8)
3.2 To attach the product to the
cultivation collar
1 If the cultivation collar is placed with the hinges
upwards, attach the greenhouse according to the
illustration shown in Figure 9. Screw the metal plates
around the greenhouse: 2 screws on the pallet collar
and 2 screws on the greenhouse.
2 If the hinges on the cultivation collar is placed
downwards, put the greenhouse on top of the pallet
collar. (Figure 10)
4 Maintenance
● Wash the product if necessary or use a soft dampened
cloth with mild detergent to clean the plastic parts.
5 Disposal
5.1 To discard the product
● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
6 Technical data
Specification Value
Length 120 cm
Width 80 cm
Height (front/rear) 19.8/42.5 cm
Weight 7.5 kg
To Next Page
Loading...