HardWire HT-2 - Page 10

6
beforetherestofyourpedaleffectssoyoudon’thavetobypassother
effectsonyourpedalboardjusttotune.
ToconnecttheTunertoyouramp,dothefollowing:
1. Ifyouarenotusingbatterypower,connectanoptionalPS200Rtothe
HardWireTuner’spowerinput.
2. Connectacablefromyourinstrument’s1/4"jacktothe1/4”Input.
3. ConnecttheTuner’sTHRUoutputtotheinputofyouramplifiertohear
yourguitarwhiletuning.ConnecttheTuner’sMUTEoutputtotheinput
ofyourguitaramplifierifyoudonotwanttohearyourguitarwhiletun-
ing.
Note: Use unbalanced mono instrument cables only.