Need help?Do you have a question about the HardWire HT-2 and is the answer not in the manual?
General| Brand | HardWire |
|---|---|
| Model | HT-2 |
| Category | Recording Equipment |
| Language | English |
Details FCC compliance, operational conditions, and avoiding electromagnetic fields.
Lists critical safety guidelines for user protection and proper operation.
Explains warranty registration, coverage period, and defect handling.
Outlines liability limits, conditions for voiding warranty, and disclaimers.
Introduces HardWire pedals and their features.
Lists the accessories included with the HardWire HT-2 Tuner.
Describes the function of the Mode and Tuning buttons.
Explains the Input, Thru, and Mute output jacks.
Covers the Foot Switch and its release pins.
Explains how the LEDs indicate sharpness/flatness and tuning references.
Details the single Input and two Output jacks for connecting the tuner.
Advises on optimal placement within a pedal chain.
Illustrates the typical setup for connecting the tuner to an amplifier.
Lists selectable tuning references like A=440, A=A flat, A=G.
Details steps to select a new tuning reference using the TUNING button.
Describes how the LED array behaves in Strobe mode for tuning.
Explains how the LED array indicates tuning status in Normal mode.
Step-by-step guide on tuning using the Strobe display mode.
Step-by-step guide on tuning using the Normal display mode.
Explains the automatic bypass when battery power is depleted.
Provides instructions for replacing the 9V battery.
Lists performance accessories for pedalboard integration.
Details the steps to attach the pedalboard pad to the pedal.
Provides instructions for applying the glow sticker to the foot switch.
Lists the product's controls and connection jacks.
Details input impedance, power supply, current draw, dimensions, and weight.
Lists compatible PS200R power supply models for different regions.
To Next Page