HardWire HT-2 - Select A Tuner Reference; Available References; Reference Selection Process

8
Select A Tuner Reference
TheHardWireTunerhasmultipletuningreferencestoselectfrom:A=A440
(standardtuning),A=Aflat(tunedhalfstepdown),A=G(tunedwholestep
down),andalternatetuningreferences(A=A437-A=A443).
Toselectthetunerreference,dothefollowing:
1. PresstheFootSwitchtoturnonthetuner.Adashappearsinthenote
display.
2. PresstheTUNINGbutton.Atappearsinthenotedisplayandthe
LEDabovethecurrenttuningreferencelights.PresstheTUNING
buttontoselectthenexttuningreference.Thereferenceisa1/2step
down(A=Aflat)iftheLEDabove
bislit.Thereferenceisawholestep
down(A=G)iftheLEDabovebb islit.
3. OncetheselectedtuningreferenceLEDislit,wait3secondsandthe
pedalreturnstonormaloperation.Thelasttuningreferenceselectedis
automaticallysaved.