To Next PageTo Next Page
Need help?Do you have a question about the Hardy HI 1734-WS and is the answer not in the manual?
Describes the HI1734-WS Weigh Scale Module, its features, and industrial applications.
Explains the Waversaver® technology for filtering vibration and noise for accurate measurements.
Details the C2® Electronic Calibration, an alternative to traditional test weight calibration.
Describes the INTEGRATED TECHNICIAN™ (IT) system diagnostics utility for troubleshooting.
Details optional tests like Return to Zero and Weighing System Test for advanced diagnostics.
Explains the Auto Zero Tracking capability to automatically adjust for zero weight.
Lists detailed technical specifications for the HI1734-WS module, including conversion rate, resolution, and input.
Outlines the operating and storage temperature ranges and humidity limits for the module.
Presents the default configuration parameters, their data types, and valid ranges.
Provides an overview of the installation process and essential handling precautions, including ESD safety.
Details the step-by-step procedure for physically installing the HI1734-WS module and its base.
Illustrates the wiring configurations for connecting load sensors to the module via Hardy Junction Boxes.
Guides on checking module and network status LEDs for normal operation and potential issues.
Explains how to establish communication between the PLC and the HI1734-WS module using RS Logix.
Lists and describes the parameters available for configuring the I/O module's behavior and performance.
Details the Hardy command numbers and the structure of input/output tables for module interaction.
Explains status word bits and command return codes for diagnosing module status and errors.
Outlines steps to verify load sensor installation and check for binding before calibration.
Describes how to measure load sensor output using a voltmeter or IT diagnostics.
Explains how to verify correct weight reading changes when applying a load.
Defines parameters like Unit of Measure, Motion Tolerance, Zero Tolerance, Span Weight, etc., for calibration.
Details the C2 Calibration procedure using Ladder Logic, Faceplate, or AOP.
Describes the traditional calibration method using test weights and sending calibration commands.
Provides a comprehensive list of return codes and status bits with their definitions and recommended actions.
Highlights Hardy's installation and commissioning services for optimal product performance and reduced downtime.
Details emergency support options, including nationwide technicians and after-hours service.
Provides a comprehensive list of all configurable and read-only parameters with their hexadecimal IDs.
Details parameters that can be modified or written to the module, including Units, Waversaver, etc.
Lists parameters used for writing diagnostic information to the module.
Lists parameters related to IT test diagnostics for channels and MV/V readings.
Lists read-only system parameters such as Gross Weight, Net Weight, and ADC counts.
Lists parameters related to the stability testing of the weighing system.
General| Brand | Hardy |
|---|---|
| Model | HI 1734-WS |
| Category | I/O Systems |
| Language | English |
