Need help?Do you have a question about the Harken MKIII 00AL and is the answer not in the manual?
General| Brand | Harken |
|---|---|
| Model | MKIII 00AL |
| Category | Boating Equipment |
| Language | English |
Determines unit compatibility based on boat specifications.
Assesses the headstay wire's condition for safe reuse with the furler.
Safety warning against drilling boat's chainplate or toggle.
Explains how to measure and record pin-to-pin headstay length for assembly.
Instructions for sliding connectors onto the headstay in the correct order.
Specific instructions for attaching Norseman, Sta-Lok, or rod terminals.
Procedure for cutting and adjusting foil lengths based on headstay measurements.
Steps for modifying the bottom foil, including drilling holes.
Matching foil length to headstay length.
Specific adjustments for foil length based on turnbuckle and terminal types.
Modifying the bottom foil for proper fit and installation.
Tables for determining required foil lengths based on headstay measurements.
Warnings regarding foil cutting and cleaning.
Instructions for cutting top foil based on headstay length.
Crucial advice on cleaning foil shavings after cutting.
Steps for securing the top connector and trim cap to the foil.
Procedures for stepping the mast and adjusting the turnbuckle.
Detailed steps for mast stepping and turnbuckle adjustment.
Critical advice on preventing halyard wraps around the headstay foil.
Safety procedures for handling halyard wraps, emphasizing no forced operation.
When and how to use a halyard guide for proper jib halyard lead.
Ensuring optimal performance through correct headstay tension.
Instructions for furling and reefing sails.
Details on reefing sails and balancing the boat.
To Next Page
