Please read these instructions carefully before installing, servicing, or operating the equipment.
This manual may be modified without notice. See: www.harken.com/manuals for updated versions.
PLEASE SAVE THESE INSTRUCTIONS
REFLEX
™
FURLING
Unit 1, 2
Installation Manual – Intended for specialized personnel or expert users
5015 04-16
Table of contents
Preassembly
Safety precautions 2
Part descriptions/terms 2 -3
Size check 3
Parts 4
Additional parts required/tools 5
Dimensions/sailmaker's Instructions 6
Cable length worksheet 7
Assembly
Threaded adapter 8
Terminating torsion cable to head swivel 9 -11
Terminating torsion cable to tack swivel 11
Determining cable length at boat 12
Cutting torsion cable and final assembly 13-14
Commissioning
Loading furling line in drive unit 15
Mounting fairleads/line to cockpit 16
Attaching sail to unit 17
Operation
Raising sail first time/halyard tension 17
Furling 18
Lowering sail/hoisting furled sail/sail changes 19
Sail changes 19
Maintenance
Cleaning parts and bearing assemblies 20
Warranty 20
To Next Page
Need help?
General
