To Next PageTo Next Page
Need help?Do you have a question about the Harley Benton GPA-100 and is the answer not in the manual?
Details proper product use, child safety, environmental conditions, and handling guidelines.
Warns about high voltages, short circuits, and proper power connection to prevent shock or fire.
Advises on preventing hearing damage by avoiding prolonged high volume levels.
Highlights compact design, Class-D technology, direct connectivity, and tone controls.
Identifies and describes the function of each knob, switch, and LED on the front panel.
Steps for connecting mains, input signal from preamp/effects, and speaker cabinet.
How to check signal presence, prevent overload, and adjust volume for optimal sound.
Using BASS, MID, and TREBLE controls to shape the sound frequencies.
Explains the protection circuit's function, indicator, and troubleshooting steps.
Procedure for turning off the device and unplugging for long periods.
Details output power, input/output type, supply voltage, dimensions, and weight.
Instructions for proper disposal of packaging and compliance with WEEE directive.
The Harley Benton GPA-100 is a compact, solid-state power amplifier pedal designed specifically for electric guitars. It utilizes lightweight Class-D technology, making it a portable and efficient solution for musicians. This device is intended to amplify instrument signals at line level for reproduction through loudspeaker cabinets.
The GPA-100 serves as a dedicated power amplifier, allowing direct connection to a guitar preamp or an effects pedal. It features a master volume control, along with dedicated Bass, Mid, and Treble controls, enabling comprehensive tonal shaping. The amplifier is equipped with a protection circuit that includes an LED display, providing visual feedback on its operational status. This includes a Peak indicator LED to warn of excessive input signals, a Signal indicator LED to confirm the presence of an input signal, and a Power-On indicator LED.
Powering On and Connecting: To power the device, connect its mains socket to a properly wired mains outlet using the supplied mains cable. Ensure the mains voltage matches the device's voltage rating. For input, connect the line-level output of your guitar preamp or effects unit to the GPA-100's INPUT jack using a 1/4" jack cable. For output, connect a guitar speaker cabinet that matches the specified impedance and load capacity to the OUTPUT jack using a 1/4" speaker cable. Once all connections are secure, set the power switch to the ON position. The PWR/PRO LED will illuminate green, indicating the unit is powered on.
Playing and Tone Control: When you play your instrument, the SIGNAL LED will light up, indicating the presence of a signal. If the PEAK LED illuminates, it signifies that the input signal is too high, potentially causing unpleasant distortion due to overload. In such cases, reduce the output signal from your connected device until the PEAK LED no longer lights up. The overall volume can be adjusted using the VOLUME control. For tonal adjustments, the BASS control allows you to shape the low-frequency portion of the signal, the MID knob controls the midrange frequencies, and the TREBLE knob adjusts the high frequencies.
Protection Circuit: The GPA-100 incorporates a built-in protection circuit designed to safeguard both the device and connected components. If this circuit is triggered, the PWR/PRO LED will turn red, and the output will be muted. Should this occur, switch off the device using the on/off switch, wait approximately one minute, and then switch it back on. If the PWR/PRO LED remains red, it indicates a persistent issue, and you should contact customer service.
Powering Off: After use, turn the power switch to the OFF position. If the unit will not be used for an extended period, it is recommended to unplug the power cord from the wall outlet to reduce the risk of electric shock or fire.
General Handling and Cleaning: To prevent damage, always handle the GPA-100 with care and avoid using excessive force. The device should never be immersed in water. For cleaning, simply wipe the unit with a clean, dry cloth. Do not use liquid cleaners such as benzene, thinners, or any flammable cleaning agents, as these can damage the finish or internal components.
Safety Precautions: It is crucial to ensure that plastic bags, packaging, and any small detachable parts are kept out of reach of babies and young children to prevent choking hazards. The device should not be used outdoors, in conditions of extreme temperature or humidity, in excessively dusty or dirty areas, near heat sources or open flames, in wet locations, or where it may be exposed to strong vibrations. Never remove any covers from the device, as there are no user-serviceable parts inside, and high voltages may be present. Do not use the device if covers, protectors, or optical components are missing or damaged. Always use the proper, ready-made, insulated mains cabling with a protective contact plug, and never modify the mains cable or plug.
Hearing Protection: When loudspeakers are connected, the GPA-100 can produce high volume levels that may cause temporary or permanent hearing impairment. Avoid operating the device permanently at high volume levels. If you experience ringing in your ears or hearing impairment, immediately decrease the volume level.
Environmental Considerations: For transport and protective packaging, environmentally friendly materials have been chosen that can be recycled. Ensure that plastic bags and packaging are disposed of properly, not with normal household waste, but through appropriate recycling channels. The product itself is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE). Do not dispose of the old device with normal household waste; instead, dispose of it through an approved waste disposal firm or your local waste facility, complying with all applicable rules and regulations in your country.
Power| output power at 8 ohms | 100 W |
|---|---|
| output power at 4 ohms | 190 W |
| supply voltage | 230 V ~ 50 Hz |
Weight and Dimensions| dimensions | 162 × 100 × 64 mm |
|---|---|
| weight | 0.8 kg |
