Need help?Do you have a question about the Harley Benton hbac-30 and is the answer not in the manual?
Power| output power rating | 30W RMS @ 10% THD, 8 Ω, 13.6VDC in |
|---|---|
| power requirement | Internal 12V DC power supply |
| mains adaptor | 15V DC |
| vehicle lighter adaptor | optional 12V |
Audio Specifications| input impedance | 1 MΩ |
|---|---|
| maximum signal accepted channel 1 | 6V peak to peak |
| maximum signal accepted channel 2 | 12V peak to peak |
| gain channel 1 | 64dB |
| gain channel 2 | 56dB w/Gain switch out |
| gain channel 2 with gain switch in | 86dB |
| sensitivity channel 1 | 9mV RMS |
| sensitivity channel 2 with gain switch out | 20mV RMS |
| sensitivity channel 2 with gain switch in | .7mV RMS |
| line insert | .3V RMS |
| tone channel 1 | +/- 15dB @ 600Hz |
| eqs channel 2 low | 12.5dB range @ 80Hz |
| eqs channel 2 mid | 18.0dB range @ 850Hz |
| eqs channel 2 high | 13.0dB range @ 6kHz |
Ports & Interfaces| insert jack tip | Line In |
|---|---|
| insert jack ring | Line Out |
| insert jack sleeve | Ground |
Speakers| woofer size | 8" |
|---|---|
| woofer impedance | 8Ω |
| woofer power | 50 watt |
| woofer voice coil size | 1" |
| tweeter size | 2" Piezo |
| tweeter power | 10 watt |
Weight and Dimensions| dimensions (W x H x D) | 17" x 12.5" x 12.5" |
|---|---|
| weight | 17 lbs. |
Precautions for safe electrical connection and operation, avoiding water and damage.
Guidance on safely disconnecting power and ensuring socket access for emergencies.
Warnings about ventilation, heat sources, and unattended operation to prevent fire hazards.
Advice on keeping the device away from children and protecting hearing from high volumes.
Instructions for battery charging and avoiding incorrect adapter use to prevent device damage.
Details of knobs, jacks, and indicators on the amplifier's front panel for operation.
Description of rear panel ports for power input and charging indicators.
Ensuring correct mains voltage and proper connection of the power adaptor for charging.
Guides on connecting instruments/mics and using the INSERT socket for effects.
Examples of connecting external audio sources like drum machines or CD players.
Connecting headphones and the resulting loudspeaker disconnection, with hearing safety advice.
Wiring schematic for headphone connections, detailing Tip, Ring, and Sleeve functions.
Wiring schematic for mono line inputs, detailing Tip and Sleeve functions.
Wiring schematic for insert points, detailing Send and Return signal paths.
Instructions for environmentally responsible disposal of the device and packaging.
Detailed specifications including power, impedance, gain, sensitivity, dimensions, and weight.
To Next Page
