Harley Benton ISO12AC Pro Modular - User Manual

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de DocID: 561914_03.08.2023
Features
• Extremely powerful multi-power supply for eects pedals
• 12 individually insulated outputs and 1 uninsulated output
• Filtered and short-circuit-proof outputs eliminate noise & humming
• Capable of handling high currents for modern digital eects
• LED monitoring at each output (LED turns o if the output is overloaded, and the
output switches o)
• Modular AC main output makes it possible to connect two or more devices using
kettle socket on plug (included in scope of delivery) or as AC link to the power strip
• Compact, sturdy aluminium housing can be used on or under pedal boards
• 1 × USB-A and 1 × USB-C for power supply and for charging tablets and phones
EN
ISO12AC Pro Modular
Scope of delivery
• ISO12AC Pro Modular
• 4×DC cable, each 30cm long
• 5×DC cable, each 60cm long
• 4×DC cable, each 90cm long
• 1× connecting cable, 45cm long, male plug straight to green right-angled plug,
5.5 × 2.1mm to 5.5 × 2.5mm for Line6 pedals
• 1× AC kettle plug-to-plug (female to male)
• 1×AC power cable, 1.2m long with EU plug
• 1× AC connecting cable, kettle plug to EU socket, 15cm long
'
ö
#%&
(
)$
Connections
1 Kettle AC input with 100-240V universal input voltage 50/60Hz
2 Output 1 with 9V @3,000mA, uninsulated
3 Outputs 2 - 5 with 9V @250mA, insulated
4 Outputs 6 - 9 with 9V @500mA, insulated
5 Outputs 10 - 13 with voltage switch, insulated, can switch between 9V @
500mA /12V @ 375mA /18V @ 250mA
6 USB-A output, uninsulated, max. 18W
7 USB-C output, uninsulated, max. 18W
8 Kettle AC output
Safety instructions
Intended use
This device is intended for use as a multi-power supply for supplying power to ef-
fects pedals. Any other use or use under other operating conditions is considered to
be improper and may result in personal injury or property damage. No liability will
be assumed for damage resulting from improper use. This device may be used only
by persons with sucient physical, sensory, and intellectual abilities and having
corresponding knowledge and experience. Other persons may use this device only
if they are supervised or instructed by a person who is responsible for their safety.
Risk of injury and choking hazard for children!
Children can suocate on packaging material and small parts. Children
can injure themselves when handling the device. Never allow children to
play with the packaging material and the device. Always store packaging
material out of the reach of babies and small children. Always dispose of
packaging material properly when it is not in use. Never allow children to
use the device without supervision! Keep small parts away from children
and make sure that the device does not shed any small parts (such as
knobs) that children could play with.
Risk of death from electrical current!
A short circuit can cause res and loss of life. Always use proper ready-
made insulated mains cabling (power cord) with a safety plug. Do not
modify the mains cable or the power plug. If the insulation is damaged,
immediately switch o the power supply and have it repaired. If in doubt,
contact a qualied electrician.
Risk of death from electrical current!
The output cable that transfers the supply voltage conducts hazardous
voltage. The output cable must be professionally insulated and thus se-
curely terminated. If the insulation is damaged, immediately switch o
the power supply and have it repaired. If in doubt, contact a qualied
electrician.
Risk of re by exceeding the maximum current
The device can supply power to other devices of identical design and
connected in series. If too many devices are connected, the power
consumption can exceed the maximum permitted power consumption,
which can cause the device to overheat and burst into ames. Only con-
nect devices of identical design to the device. When deciding how many
devices you can connect in series, make sure that the maximum permitted
power consumption as stated on the device is not exceeded. Also refer to
the specications in the technical specications for the device. Only use
power cords with a cable cross-section designed for the required current
intensity when connecting the devices in series.
Operating location
Never use the product in the following ambient conditions:
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty places
• in locations where the device may get wet
General handling
• To prevent damage, do not exert force when handling the product.
• Do not immerse the product in water. Wipe only with a clean and dry cloth. Do not
use liquid cleaners such as benzene, thinners or ammable cleaning agents
• The total power output of the device must not exceed 27W.
Quick start guide
This document contains important information on the safe use of the product.
Read and follow the safety instructions and all other instructions. Keep the docu-
ment for future reference. If you pass the product on to others, please include this
document. Contents are subject to change. Please refer to the latest version of the
documentation, which is ready for download under www.thomann.de.

Harley Benton ISO12AC Pro Modular Specifications