Harley-Davidson 2014 - Touring Specs At-A-Glance

SPECS AT-A-GLANCE
Touring
specification
flHr
road kinG
®
flHtcu
electra Glide
®
ultra classic
®
flHtk
ultra limited
flHX
street Glide
®
flHXs
street Glide
®
special
Length 96.5 in. (2450 mm) 102.4 in. (2600 mm) 102.4 in. (2600 mm) 96.5 in. (2450 mm) 96.5 in. (2450 mm)
Seat Height
(laden)
1
26.7 in. (678.18 mm) 56.7 in. (1440 mm) 27.3 in. (695 mm) 26.1 in. (662.94 mm) 26.1 in. (662.94 mm)
Seat Height
(unladen) 28.2 in. (715 mm) 27.3 in. (695 mm) 29.1 in. (740 mm) 27.4 in. (695 mm) 27.4 in. (695 mm)
Ground Clearance 5.3 in.
(135 mm) 5.3 in. (135 mm) 5.3 in. (135 mm) 5.3 in. (135 mm) 5.3 in. (135 mm)
Rake
(steering head) 26° 26° 26° 26° 26°
Fork Angle 29.25° 29.25° 29.25° 29.25° 29.25°
Trail 6.7 in.
(170.18 mm) 6.7 in. (170 mm) 6.7 in. (170 mm) 6.8 in. (172.72 mm) 6.8 in. (170 mm)
Wheelbase 64 in.
(1625 mm) 64 in. (1625 mm) 64 in. (1625 mm) 64 in. (1625 mm) 64 in. (1625 mm)
Weight
(as shipped) 779 lbs. (353 kg) 844 lbs. (383 kg) 861 lbs. (391 kg) 775 lbs. (352 kg) 775 lbs. (352 kg)
Engine Air-cooled, High Output Twin Cam
103™ with integrated oil cooler
Air-cooled, High Output Twin Cam
103™ with integrated oil cooler
Twin-Cooled™ High Output
Twin Cam 103™
Air-cooled, High Output Twin Cam
103™ with integrated oil cooler
Air-cooled, High Output Twin Cam
103™ with integrated oil cooler
Displacement 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc)
Transmission
6-speed Cruise Drive
®
6-speed Cruise Drive
®
6-speed Cruise Drive
®
6-speed Cruise Drive
®
6-speed Cruise Drive
®
Fuel System
2
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Fuel Capacity 6 gal. (22.7 L) 6 gal. (22.7 L) 6 gal. (22.7 L) 6 gal. (22.7 L) 6 gal. (22.7 L)
Tire Size:
• Front
• Rear
D408F BW 130/80B17 65H
D407T BW 180/65B16 81H
D408F BW 130/80B17 65H
D407T BW 180/65B16 81H
D408FBW 130/80B17 65H
D407T BW 180/65B16 81H
D408F 130/60B19 61H
D407T BW 180/65B16 81H
D408F 130/60B19 61H
D407T BW 180/65B16 81H
Wheels
3
17-inch front;
16-inch rear
Impeller Cast Aluminum
(Chrome Laced with Whitewall
option)
17-inch front;
16-inch rear
Impeller Cast Aluminum
17-inch front;
16-inch rear
Impeller Cast Aluminum
19-inch front;
16-inch rear
Enforcer Cast Aluminum
19-inch front;
16-inch rear
Enforcer Cast Aluminum
Lean Angle
(per J1168) (right/left)
32°/32.1° 31.9°/31.8° 31.9°/31.8° 32°/31° 32°/31°
Note: The vehicles in the configuration shown in this reference
guide are not available for sale and use in several countries
outside of the U.S. Please check with your local dealer for
details. We reserve the right to discontinue models or change
specifications at any time without incurring any obligations.
The vehicles pictured in this reference guide are for sale in
the U.S. only. Vehicle specifications may vary from country
to country depending on local laws, and some models and
accessories are not available in certain countries. Be aware
that many countries prohibit the importation, registration
and/or use of vehicles and accessories not built to their
country specifications. Check with your local dealer for details.
1
Measurement reects 180 lb. (81.7 kg) operator weight.
2
Recommended 91 octane or higher fuel (R+M)/2.
3
Standard and optional wheels may vary by country and region.