SPECS AT-A-GLANCE
Dyna
®
Family
specification
New fXDb
street bob
®
fXDc
super GliDe
®
custom
fXDf
fat bob
®
fXDwG
wiDe GliDe
®
flD
switchback
™
Length 94.3 in. (2395 mm) 92.3 in. (2345 mm) 94.5 in. (2400 mm) 96.3 in. (2445 mm) 92.9 in. (2360 mm)
Seat Height (laden)
1
25.5 in. (648 mm) 26.3 in. (668 mm) 26.1 in. (663 mm) 25.5 in. (648 mm) 26.1 in. (663 mm)
Seat Height
(unladen) 26.8 in. (680 mm) 28 in. (710 mm) 27.2 in. (690 mm) 26.8 in. (680 mm) 27.4 in. (695 mm)
Ground Clearance 4.7 in. (120 mm) 4.7 in. (119 mm) 4.9 in. (125 mm) 3.9 in. (100 mm) 4.3 in. (110 mm)
Rake
(steering head) 29° 29° 29° 34° 29.9°
Fork Angle 29° 29° 28° 36° 28.9°
Trail 4.7 in. (119 mm) 4.7 in. (119 mm) 4.92 in. (125 mm) 5.2 in. (132 mm) 5.84 in. (148.3 mm)
Wheelbase 64.2 in. (1630 mm) 64 in. (1625 mm) 63.8 in. (1620 mm) 67.5 in. (1715 mm) 62.8 in. (1595 mm)
Weight
(as shipped) 637 lbs. (289 kg) 648 lbs. (294 kg) 673 lbs. (305 kg) 650 lbs. (295 kg) 696 lbs. (316 kg)
Engine Air-cooled, Twin Cam 103™ Air-cooled, Twin Cam 103™ Air-cooled, Twin Cam 103™ Air-cooled, Twin Cam 103™ Air-cooled, Twin Cam 103™
Displacement 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc)
Transmission 6-speed Cruise Drive
®
6-speed Cruise Drive
®
6-speed Cruise Drive
®
6-speed Cruise Drive
®
6-speed Cruise Drive
®
Fuel System
2
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Fuel Capacity 4.7 gal. (17.8 L) 5.0 gal. (18.9 L) 5.0 gal. (18.9 L) 4.7 gal. (17.8 L) 4.7 gal. (17.8 L)
Tire Size:
• Front
• Rear
Scorcher
®
“31” 100/90-19 57H
Scorcher
®
“31” 160/70-17 73V
Scorcher
®
“31” 100/90-19 57H
Scorcher
®
“31” 160/70-17 73V
D427F 130/90B16 67H
D427 180/70B16 77H
Scorcher
®
“31” 80/90-21 54H
Scorcher
®
“31” 180/60B17 75V
Dunlop
®
D402F 130/70B18 63H
Dunlop
®
D401 160/70B17 73H
Wheels
3
19-inch front;
17-inch rear
Black Steel Laced
19-inch front;
17-inch rear
Steel Laced (Chrome,
Aluminum Profile Laced,
front and rear option)
16-inch front;
16-inch rear
Machined Aluminum Slotted Disc
21-inch front;
17-inch rear
Black Steel Laced
18-inch front;
17-inch rear
Black 5-Spoke Cast Aluminum
Lean Angle
(per J1168) (right/left)
30°/31° 29.5°/30.9° 30°/31° 28.4°/31.9° 29°/29°
Note: The vehicles in the configuration shown in this reference
guide are not available for sale and use in several countries
outside of the U.S. Please check with your local dealer for
details. We reserve the right to discontinue models or change
specifications at any time without incurring any obligations.
The vehicles pictured in this reference guide are for sale in
the U.S. only. Vehicle specifications may vary from country
to country depending on local laws, and some models and
accessories are not available in certain countries. Be aware
that many countries prohibit the importation, registration
and/or use of vehicles and accessories not built to their
country specifications. Check with your local dealer for details.
1
Measurement reflects 180 lb. (81.7 kg) operator weight.
2
Recommended 91 octane or higher fuel (R+M)/2.
3
Standard and optional wheels may vary by country and region.
To Next Page
Loading...