SPECS AT-A-GLANCE
Softail
®
family
specification
flstc Heritage
softail
®
classic
flstf
fat boy
®
flstfb
fat boy
®
lo
flstn softail
®
Deluxe
fls softail
slim
®
fxsb
breakout
®
Length 94.7 in. (2405 mm) 94.3 in. (2396 mm) 93.9 in. (2385 mm) 94.5 in. (2400 mm) 92.5 in. (2350 mm) 96.3 in. (2445 mm)
Seat Height
(laden)
1
25.5 in. (648 mm) 25 in. (635 mm) 24.25 in. (616 mm) 24.5 in. (622 mm) 23.8 in. (605 mm) 24.7 in. (627 mm)
Seat Height
(unladen) 27.2 in. (690 mm) 27.2 in. (690 mm) 26.4 in. (670 mm) 26.4 in. (670 mm) 25.6 in. (650 mm) 26 in. (660 mm)
Ground Clearance 5.2 in. (131 mm) 5.1 in. (130 mm) 4.9 in. (125 mm) 4.5 in. (113 mm) 4.5 in. (115 mm) 4.7 in. (120 mm)
Rake (steering head) 31° 31° 31.6° 32.1° 32.1° 35°
Fork Angle 31° 31° 31.6° 32° 31° 37°
Trail 5.8 in. (147 mm) 5.8 in. (147 mm) 5.8 in. (147 mm) 5.8 in. (147 mm) 5.8 in. (147 mm) 5.7 in. (146 mm)
Wheelbase 64.4 in. (1635 mm) 64.4 in. (1635 mm) 64.2 in. (1630 mm) 64.4 in. (1635 mm) 64.4 in. (1635 mm) 67.3 in. (1710 mm)
Weight
(as shipped) 730 lbs. (331 kg) 694 lbs. (315 kg) 700 lbs. (318 kg) 695 lbs. (315 kg) 672 lbs. (305 kg) 672 lbs. (305 kg)
Engine Air-cooled,
Twin Cam 103B
TM
Air-cooled,
Twin Cam 103B
TM
Air-cooled,
Twin Cam 103B
TM
Air-cooled,
Twin Cam 103B
TM
Air-cooled,
Twin Cam 103B
TM
Air-cooled,
Twin Cam 103B
TM
Displacement 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc) 103.1 cu. in. (1690 cc)
Transmission 6-speed
Cruise Drive
®
6-speed
Cruise Drive
®
6-speed
Cruise Drive
®
6-speed
Cruise Drive
®
6-speed
Cruise Drive
®
6-speed
Cruise Drive
®
Fuel System
2
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Electronic Sequential Port Fuel
Injection (ESPFI)
Fuel Capacity 5 gal. (18.9 L) 5 gal. (18.9 L) 5 gal. (18.9 L) 5 gal. (18.9 L) 5 gal. (18.9 L) 5 gal. (18.9 L)
Tire Size:
• Front
• Rear
D402F MT90B16 72H
D401 150/80B16 71H
D408F 140/75R17 67V
D407 200/55R17 78V
D408F 140/75R17 67V
D407 200/55R17 78V
D402F MT90B16 72H
D402 MU85B16 77H
D402F MT90B16 72H
D402 MU85B16 77H
D408F 130/60B21 63H
D407 240/40R18 79V
Wheels
3
16-inch front;
16-inch rear
Steel Laced (Chrome,
Tubeless Profile Laced
Aluminum option)
17-inch front;
17-inch rear
Mirror Polished Chrome,
Bullet Hole Disc Cast
Aluminum
17-inch front;
17-inch rear
Black Bullet Hole Disc
Cast Aluminum
16-inch front;
16-inch rear
Steel Laced (Chrome,
Tubeless Profile Laced
Aluminum option)
16-inch front;
16-inch rear
Black Steel Laced
21-inch front;
18-inch rear
Black 10-Spoke
Cast Aluminum
Lean Angle
(per J1168) (right/left)
24.4°/25.9° 26.2°/27° 25.6°/25.2° 25.8°/26.7° 24°/24.9° 23.4°/23.4°
Note: The vehicles in the configuration shown in this reference
guide are not available for sale and use in several countries
outside of the U.S. Please check with your local dealer for
details. We reserve the right to discontinue models or change
specifications at any time without incurring any obligations.
The vehicles pictured in this reference guide are for sale in
the U.S. only. Vehicle specifications may vary from country
to country depending on local laws, and some models and
accessories are not available in certain countries. Be aware
that many countries prohibit the importation, registration
and/or use of vehicles and accessories not built to their
country specifications. Check with your local dealer for details.
1
Measurement reects 180 lb. (81.7 kg) operator weight.
2
Recommended 91 octane or higher fuel (R+M)/2.
3
Standard and optional wheels may vary by country and region.