Need help?Do you have a question about the Harman Kardon CDR 20 and is the answer not in the manual?
Signal Format| playback sampling frequency | 44.1 kHz |
|---|---|
| D/A conversion | 96 kHz |
| oversampling | 128 times |
Playback Specifications| frequency response | 2 Hz – 20, 050 Hz |
|---|---|
| playback S/N | 105 dB |
| playback dynamic range | 105 dB |
| playback THD | 0.005%/–88 dB |
| analog audio output | 2 V RMS, ± 2 dB |
| digital-coaxial output | 0.5 Vpp/75Ω |
| headphone output | 1 V RMS/32Ω load |
Record Specifications| digital input sample rates | 32 kHz – 96 kHz |
|---|---|
| recording S/N: analog | 91 dB |
| recording S/N: digital dub mode | equal to source |
| recording S/N: digital external source | source –10 dB |
| recording dynamic range | 91 dB |
| recording THD | 0.005%/–85 dB |
| analog input sensitivity | 330 mV RMS 47kΩ = 0 dB |
| digital inputs (direct recording) | 44.1 kHz, ±100 ppm/min. |
General| power requirement | 100~240 VAC/50~60 Hz |
|---|---|
| power consumption | 26 watts |
| width | 440 mm/17.3" |
| height | 112 mm/4.4" |
| depth | 363 mm/14.2" |
| weight | 6 kg/13.2 lb |
Key safety guidelines for operating the CDR 20 safely, including electrical and handling precautions.
Guidelines for placing the CDR 20 to ensure proper operation and avoid hazards.
Instructions and suggestions for saving packaging materials for future use or disposal.
Recommendations for cleaning the unit to avoid damage and ensure proper finish.
Important precautions to take before moving the CDR 20 to prevent damage.
How to connect the Play Deck outputs (analog and digital) to audio system components.
How to connect the Record Deck inputs and outputs to audio system components.
Instructions for inserting and replacing batteries in the remote control.
Connecting external IR sensors or outputting IR signals to other components.
Connecting the AC power cord and recommendations for surge protection.
Explains the three types of discs (CD, CD-R, CD-RW) and their compatibility.
Defines essential terms and messages like Finalize, TOC, OPC, BUSY, DISC FULL for CD recording.
Step-by-step guide for inserting and removing discs from the player decks.
How to operate the CDR 20's functions using the remote control effectively.
Basic procedure for playing CDs, including starting, stopping, and pausing playback.
How to quickly scan through a disc using forward or reverse search functions.
Methods for navigating between tracks on a disc, by number or sequential skip.
How to play two discs simultaneously, with independent or sequential playback.
Using the CDR 20 as a two-disc changer with sequential playback.
How to view track time, remaining time, and total disc time on the display.
Connecting and adjusting volume for headphones for private listening.
Creating custom playback sequences by selecting tracks and order.
How to review, modify, or delete programmed track sequences.
Options for repeating programmed sequences, single tracks, or entire discs.
Setting the unit to continuously repeat a single selected track.
Setting the unit to continuously repeat all tracks on a disc.
Programming a specific segment (A to B) of a track or passage for repeated playback.
Copying entire CDs in real-time, x2, or x4 speed using the internal dubbing feature.
Important considerations and limitations when performing dubbing operations.
Automating digital recordings from external CD/MD players with track synchronization.
Making recordings from analog or digital sources, including track increment methods.
Completing CD-R recordings for playback on other devices.
Procedures for unfinalizing, erasing entire discs, or erasing single tracks.
How to completely erase all content from a CD-RW disc.
Removing individual tracks from a CD-RW disc.
Solutions for problems like unit not operating, remote issues, or playback errors.
Detailed explanations and solutions for various error messages encountered.
To Next Page
