EasyManua.ls Logo

Harman Kardon CITATION 21 User Manual

Harman Kardon CITATION 21
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Other manuals for Harman Kardon CITATION 21

Question and Answer IconNeed help?

Do you have a question about the Harman Kardon CITATION 21 and is the answer not in the manual?

Harman Kardon CITATION 21 Specifications

General IconGeneral
BrandHarman Kardon
ModelCITATION 21
CategoryAmplifier
LanguageEnglish

Summary

Rear Panel Safety Precautions

Read Instructions

Read all safety and operation instructions before using the preamplifier.

Heed Warnings

Adhere to all warnings on the preamplifier and in its instructions.

Follow All Instructions

Ensure all provided instructions are followed.

Water and Moisture Precautions

Do not use the preamplifier near water or in wet locations.

Ventilation Requirements

Position the preamplifier to ensure proper ventilation without interference.

Additional Safety Precautions

Heat and Temperature

Avoid placing the preamplifier near heat sources or in direct sunlight.

Power Sources

Connect the preamplifier only to a 120V, 60-cycle power supply.

Power Cord Protection

Route power cords to prevent them from being walked on or pinched.

Object and Liquid Entry

Prevent objects from falling into or liquids from spilling into the unit.

Abnormal Smells or Smoke

If an abnormal smell or smoke is detected, turn off and unplug the unit.

Damage Requiring Service

Refer to qualified personnel for damage like cord damage or unit malfunction.

User Servicing Limitations

Users should not service the unit beyond manual instructions; refer to qualified personnel.

AC Plug Safety Precaution

Do not use the polarized plug with extension cords/outlets unless blades are fully inserted.

Introduction and Design Features

Control Preamplifier Controls

Control Preamplifier Set-up

Specifications

Frequency Response

Specifies the frequency range the unit can reproduce accurately.

Total Harmonic Distortion

Measures the distortion level at specific output and load conditions.

Signal-to-Noise Ratio

Measures the level of unwanted noise relative to the desired signal.

Related product manuals