Citation 7.0 Owner’s Manual
Preliminary Draft
Page # 3
Enitre Contents Copyright ©1995 - Harman Kardon Inc.
Citation 7.0 Owners’ Manual
Introduction and Safety Information
Congratulations! As the owner of a Citation 7.0 Surround Processor, you have at your command a unique product.
Combining elegant, sculpted metal panels, the latest state of the art circuit design, and Harman Kardon’s forty year
heritage of audio excellence, the Citation 7.0 will bring many years of enjoyable listening to your music or home
theater system.
In order to fully enjoy the performance of your new controller, please take a few minutes to read this owner’s manual. It
contains important information that will help you to make certain that it is properly configured for operation with the rest
of the equipment in your system.
If you have any questions about this product, it’s installation or operation, please contact the retailer or custom installer
who sold you the product. They are your best source of local information. Should you need additional information or
assistance, the toll free number for Citation customer service is 800-787-6766.
IMPORTANT SAFETY INFORMATION
Verify Line Voltage Before Use
Your new Citation 7.0 Controller has been factory preset for a specific line voltage: 110-120 volts for North America or
220-240 volts in most other countries. Connection to a line voltage other than that for which it is intended can create a
safety and fire hazard, and may damage the amplifier.
If you have any questions about the voltage requirements for your specific model, or about the line voltage in your
area, contact your selling dealer before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. If a replacement cord is used, make certain
that it is of similar gauge. We do not recommend that extension cords be used with this product. As with all electrical
devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should
be replaced immediately with cords meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug, never pull the cord. If you do not intent to
use the amplifier for any considerable length of time, disconnect the plug form the AC outlet.
To Next Page
Loading...
