User Manual
GPS-810
5
Controls and Features
Front:
TOUCHSCREEN: 4.3” 480 x 272 pixel WQVGA LCD touchscreen.
M
ICROPHONE: Lets you use the GPS-810 to voice dial and talk on a
connected Bluetooth-enabled phone.
Back:
CONNECTOR FOR EXTERNAL GPS ANTENNA: Allows connection of the optional
Guide + Play external GPS antenna (model #GPS-ANT, not included), for use
when the GPS-810 is mounted in a location where its built-in GPS antenna
does not have a clear “view” of the sky.
S
PEAKER: Built-in speaker plays navigation voice guidance commands and
audio/video files from an inserted SD memory card (see SD Card Slot, on
page 6).
M
OUNTING BASE POWER CONNECTION: Supplies DC power and a hands-free
microphone connection to the GPS-810 when used with the supplied
mounting bracket in a vehicle.
Top:
AUTO BRIGHTNESS SENSOR: Senses ambient light for the operation of the Auto
Brightness feature (see Brightness, on page 27).
GPS A
NTENNA: Must have a clear “view” of the sky to receive signals from
GPS satellites.
ON/OFF B
UTTON: The GPS-810 has two different deactivation modes:
Standby and Off.
• S
TANDBY mode: Partially shuts-down the GPS-810, keeping the navigation
maps loaded into the unit’s memory for quicker turn-on.
• O
FF mode: Completely shuts the GPS-810 off, requiring that the navigation
maps be loaded back into memory when the unit is turned back on.
When the GPS-810 is on, pressing the ON/OFF button for 1 second will place
it in S
TANDBY (the Touchscreen will display “Standby” for two seconds before
going blank); holding the ON/OFF button for 3 seconds will turn the unit O
FF
(the Touchscreen will display “Powering Off” for 3 seconds before going
blank). When the GPS-810 is O
FF or in STANDBY, momentarily pressing the
ON/OFF button will turn it on.
NOTE: When the GPS-810 is being powered by the car or wall charger the ON/OFF
button icon will glow green while the unit is being charged, and will change to orange
when the unit is fully charged.
Bottom:
RESET BUTTON: Lets you reset the GPS-810 if it becomes unresponsive or
won’t power-off. Insert a paper clip or similar item into the small hole to
press the switch. (Resetting the unit does not erase information that you
have entered, such as your home location, etc.)
M
INI USB CONNECTOR/CHARGER PORT: Connects to your computer and to
the included wall charger using the included USB cable. Connects to your
vehicle’s cigarette lighter or accessory power port using the included car
charger.
To Next Page
Loading...