Harman Kardon GPS-810NA - Phone Mode Operations and Remote Sync; Synchronizing Remote with GPS-810

IN PHONE MODE:
• When the Phonebook is
selected, holding-down the
center button allows you to
alphabetically seek through
your contact list. The screen
will display a large alphabet
display (right). Use the outer
ring to seek through the
alphabet and when the
desired letter is displayed,
press the center button once to select it.
Synchronizing the Remote with the GPS-810
If the remote fails to operate the GPS-810 you will need to synchronize their
RF frequencies (“bind” the remote):
1. Turn the GPS-810 on.
2. Press the remote’s top,
center and right buttons
simultaneously (right). The
R
EMOTE CONTROL REQUES T
screen (below, right) will
appear.
3. Place the GPS-810 unit within
1 foot of the remote.
4. Press the remote’s center
button repeatedly until the
R
EMOTE CONTROL REQUES T
screen disappears.
User Manual
36
ediug +yalp
™
GPS-810
Press the
Top, Center and
Right Buttons
Simultaneously