SPEAKER CONNECTIONS 11
Speaker Connections
Dolby* Pro Logic* (Non-Digital) –
Speaker Level
Use this installation method for Dolby Pro Logic
or Dolby Virtual Speaker applications (not
Dolby Digital, DTS
®
or other digital processing),
where the receiver/processor does not have a
subwoofer output, or a volume-controlled
preamp (line-) level output:
Connect your receiver or amplifier’s front left
and right speaker terminals to the left and right
terminals on the subwoofer that are marked
“High Level In.”
Connect the left and right terminals on the sub-
woofer that are marked “High Level Out” to the
corresponding terminals on the back of your
front left and right speakers.
To Next Page
Loading...
